anyone running aux injector controller.
 

Has anyone ever added injectors to their 7 with an additional injector controller? I'm adding two injectors for my turbo set up and will do this by adding a AIC. What type seems to work well and what type will not? I'm looking at an HKS. Any pros and Cons to speak of?

I have a really nice little microtech one if you interested, I will let go for cheap I'll get the specs together for you if you want. Never been used. I bought it for a project then wound up selling the car.

send me a pm with the details, thanks, that's really cool.

No problem

I used additional injectors controlled by a Greddy Rebic. this was before I went stand alone. they were plumed into the front of the TB. I had no problems, but I do not recomend this approach, the injectors shouldbe plumbed into the intake runners, do a search,the proper location for the injectors is pretty well established. ATP Turbo has a very reasonably priced holder on their site if you go the intake runner route. Carl

Kevin Wyum runs additional injectors. He welded fitting on the top of the manifold, etc. He runs a MoTec

I run a first gen 7 with a 2 injector setup. I'm changing to a 2nd gen plenum with the stock injector location. The controller is to drive the 2nd set of injectors in the 2nd gen plenum. I think it will be fine.