SPOautos

I killed my rear rotor housing on my 3rd Gen. Anyone know where i can get a good used one??? I'm looking from somewhere besides thepartstrader.com.

I know this isnt the right section for a post like this but most of you guys have built motors so I figured it was a good place to ask.

Thanks,

cewrx7r1

iTrader: (2)

Call some of the engine builders and ask if they would sale you one. Rotar Sports Racing is in N.C.

SPOautos

Thanks for the info man. I called Brian at Rotor Sports racing and he's going to see if he can find me a good used housing. REALLY nice guy that doesnt mind going out of thier way!!!! I'll definatly swing them some business.

BTW - if anyone is interested Brian is wanting to buy some wideband O2 sensors that show a digital readout but he has to buy 4-5 at a time. He already has a couple people interested and I might consider getting one as well. Anyway, i though there might be a couple guys interested in that. I think they are going to be $750 and if you want it to data log its $1000. Thats a good deal for the product (compared to what I've seen)

Thanks man,
STEPHEN

Greg

Brian and his wife were very generous to us lst Christmas

13BAce

You can use 89-91 TII housings if you plug up the coolant passage on the passenger side of the housing.

1FastT2

iTrader: (1)

Not that this will help but I have 2 good used 87 TII rotor housings for sale for $75 each.

13BAce

They would also work, but I think the spark plug holes are in slightly different positions.

Mach2

I've had VERY BAD experiences with Rotorsports racing in NC. Just want to give you guys the heads up!

13BAce

If you want a new part try http://www.mazdadiscountparts.com/ .

cewrx7r1

iTrader: (2)

Brian's shop put new bearings in my stat gears. They did a great job including using a special lock tight between the bearing and stat gear just like Maza Comp recommends.

The price was about $50 for both.