any thoughts...input greatly appreciated
#1
the one and only
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: socal
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
any thoughts...input greatly appreciated
I have an FD stock port single turbo...my current turbo is a split t4 mount...1.15 turbine side and .60 compressor side......i am on the verge of buying another turbo .84 turbine side and .70 compressor side...any input or experience is much appreciated....looking for a faster spool and i only run appx 16lbs of boost....semi daily driver....please post feedback
#2
Time or Money, Pick one
iTrader: (37)
1.15 is quite a large hotside for stock ports, .84 is completely on the other side of the spectrum for an fd, i believe its the smallest recommended hotside for a rew. that being said, it will greatly increase your spool, just make sure you get a divided one since you have the divided manifold, might as well take advantage of it, it helps spool as well.
#3
Rotary Enthusiast
iTrader: (4)
If your turbo is in good shape it would save you a lot of money to just replace the turbine housing. They usually are not too expensive and sometimes you can find them used. I just let a barely used .82 T4 for a 35r go for $120 shipped. Something like a .84 or .96 would probably work alot better for you.
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM