Single Turbo RX-7's Questions about all aspects of single turbo setups.

any FC´s(or FD) with Blowzilla yet??

Thread Tools
 
Search this Thread
 
Old Dec 9, 2004 | 05:44 PM
  #1  
Faster Is Faster's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 168
Likes: 0
From: Finland
any FC´s(or FD) with Blowzilla yet??

just liked to know does any FC owner have this Blowzilla? Is it worth of to consider?If not how about FD owners? If I remember correctly there was someone with the blowzilla but wasn´t tuned at the time so I´d like to know the results? How do they spool up and at what rpm? what kind of rwhp should be expected with a street ported engine @~15 psi?

Thanks

Last edited by Faster Is Faster; Dec 9, 2004 at 05:48 PM.
Reply
Old Dec 9, 2004 | 10:05 PM
  #2  
Deathstar's Avatar
Yes, I fit
 
Joined: Dec 2004
Posts: 4
Likes: 0
From: Toronto, Ontario
i'm assuming blowzilla is a turbo right? I've never heard of it. Is it a code name for a t something?
eric
Reply
Old Dec 9, 2004 | 10:07 PM
  #3  
Crusader_9x's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 1,384
Likes: 0
From: Woodstock, GA
www.cheapturbo.com
It is a t4 turbine witha gt35r compressor non ball berring i think.
Reply
Old Dec 9, 2004 | 10:14 PM
  #4  
nyt's Avatar
nyt
Rotary Enthusiast
Tenured Member 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 1,259
Likes: 4
From: long island
I'm running a T61 with a .96 undivided p trim back.

the t61 uses the gt35r compressor wheel with a to4s cover.

I see 20psi at 4500rpm on a stock motor with the hks cast undivided manifold. i love this turbo. im making over 450rwhp on pump gas with it on a stock port s5 motor
Reply
Old Dec 9, 2004 | 10:15 PM
  #5  
fc3s-gxl's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Jun 2004
Posts: 334
Likes: 0
From: Miami
i tought you meant the blowzilla wastegate
Reply
Old Dec 9, 2004 | 11:08 PM
  #6  
CCarlisi's Avatar
Rebreaking things
Tenured Member 10 Years
 
Joined: Jun 2001
Posts: 2,586
Likes: 0
From: 1 foot in Boston 1 in NJ
I have one with a large street port. I ran into a transmission/clutch problem so I haven't had a chance to finish tuning it. It has usable boost response in 4th or 5th gear at 3000rpms+. It will spool up around 2500, but you have to be patient. It flows 61lbs/min and is a bit more efficient than a T04s. Therefore, with proper tuning, it should make a little over 400rwhp at 15 psi. I have also driven a car with a GT35R (ball bearing) and a street port. I didn't notice a difference in the spool up. However, the BB 35R had a 1.06 undivded exhaust while mine has a 1.00 divided, so it's not a perfect comparison.
Reply
Old Dec 10, 2004 | 03:12 AM
  #7  
Marcel Burkett's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Nov 2001
Posts: 2,715
Likes: 1
From: trinidad and tobago
How would two of those work on a 13B ?
Reply
Old Dec 11, 2004 | 11:26 AM
  #8  
elnr's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 249
Likes: 1
From: UK
Ive got this turbo on my Fd...with cast hks manifold...had it tuned on the road but not dynoed yet.....road tuned tuner said it was quite a bit quicker than his gt35r kit.....so that should give you some idea.....love it and hit full boost by 4k rpm.!!
Reply
Old Dec 12, 2004 | 05:04 AM
  #9  
Faster Is Faster's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 168
Likes: 0
From: Finland
Originally Posted by elnr
Ive got this turbo on my Fd...with cast hks manifold...had it tuned on the road but not dynoed yet.....road tuned tuner said it was quite a bit quicker than his gt35r kit.....so that should give you some idea.....love it and hit full boost by 4k rpm.!!
what turbine A/R you have? 0.96 undivided?
Reply
Old Dec 12, 2004 | 07:56 AM
  #10  
elnr's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 249
Likes: 1
From: UK
0.96 undivided.....bear in mind response is subject to your tuning and porting.
Reply
Old Dec 13, 2004 | 07:03 AM
  #11  
Faster Is Faster's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 168
Likes: 0
From: Finland
any idea how A/R 1.00 divided would work on FC with RB street port? What kind of rwhp should be expected @15psi at ??rpm?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
inMotion719
Introduce yourself
1
Sep 28, 2015 03:09 PM
driftxsequence
NE RX-7 Forum
0
Sep 5, 2015 04:21 PM
sephalix
2nd Generation Specific (1986-1992)
6
Dec 3, 2002 10:28 AM
Mikey_b
2nd Generation Specific (1986-1992)
29
Sep 18, 2002 11:10 AM
NCsublime
2nd Generation Specific (1986-1992)
6
Jan 6, 2002 01:42 PM




All times are GMT -5. The time now is 03:51 AM.