Another 12a turbo blowthrough LIVES!!!
#1
7less for now!
Thread Starter
Join Date: Oct 2007
Location: eau claire
Posts: 1,372
Likes: 0
Received 0 Likes
on
0 Posts
Another 12a turbo blowthrough LIVES!!!
Been busy all winter. Runs pretty good some tuneing issues need to be addresed. Spikes out at 11psi but drops back to 7 stable. Haveing a small leakdown issue but i shall fix that!!! all thats left is battery relocation and exhaust from dp back. Useing factory S4 turbo and mani with some mods
#2
Registered Loser
Join Date: Nov 2007
Location: Concord, NC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
If I said I wated to run this exact same setup on my FMOC motor...how much doe am I looking at spending??
I love the work you did. It looks incredible!!
~andrew
I love the work you did. It looks incredible!!
~andrew
#4
7less for now!
Thread Starter
Join Date: Oct 2007
Location: eau claire
Posts: 1,372
Likes: 0
Received 0 Likes
on
0 Posts
i would part with the whole kit for 1,200 would include everything from the fron to the fuel pump in the back you would need. it would bolt right up oc dosnt matter lol
Respeed made the adpater to mount the s4 to the 12a basically two flanges, with runners at the right angle and a custom intake to allow the turbo to sit close to the block.
Respeed made the adpater to mount the s4 to the 12a basically two flanges, with runners at the right angle and a custom intake to allow the turbo to sit close to the block.
#6
7less for now!
Thread Starter
Join Date: Oct 2007
Location: eau claire
Posts: 1,372
Likes: 0
Received 0 Likes
on
0 Posts
Thanks zack. I had some small exhaust leaks when i talked to you i had to figure out. but i am just cleaning up teh engine bay and finishing up exhaust.
#7
Registered Loser
Join Date: Nov 2007
Location: Concord, NC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
i would part with the whole kit for 1,200 would include everything from the fron to the fuel pump in the back you would need. it would bolt right up oc dosnt matter lol
Respeed made the adpater to mount the s4 to the 12a basically two flanges, with runners at the right angle and a custom intake to allow the turbo to sit close to the block.
Respeed made the adpater to mount the s4 to the 12a basically two flanges, with runners at the right angle and a custom intake to allow the turbo to sit close to the block.
However I just came upon the idea of it even being possible to turbo a 12A so I am now going to start saving...
Do you think you will have another kit for sale when summer rolls around??
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post