700whp FD Rx-7 Built by Addicted Performance
#37
Living life 9 seconds at a time
iTrader: (2)
Join Date: Feb 2001
Location: Abingdon, Md
Posts: 6,541
Likes: 0
Received 0 Likes
on
0 Posts
151mph.....Its not as hard to make that much power as it is to keep it together making that much power. If you make 900whp on any other fuel but meth it wont stay together long at all. Don't care how its built, unless its a 20B, then you only stress everything half as much.
#39
Rotary Freak
iTrader: (8)
151mph.....Its not as hard to make that much power as it is to keep it together making that much power. If you make 900whp on any other fuel but meth it wont stay together long at all. Don't care how its built, unless its a 20B, then you only stress everything half as much.
ive done 700rwhp on 93 octane fuel and it held together for many years.
I "Think" i can do 900 on E85.
I might try that one day when i can find a suitable street turbo to do it.
#40
Eats, Sleeps, Dreams Rotary
iTrader: (10)
...amazing. When I first bought my FD back in 2000, people were discussing how to break 400 RWHP. Only one or two had topped 500. Absolutely incredible, and to even remotely suggest that this kind of power can be made reliably (i.e., and engine staying together a year or more), again, shows just how far technology has taken things!
#41
Rotary Enthusiast
iTrader: (3)
Beautiful!!
what color is it ? I mean what paint code
love the wheels, what wheels sizes and offset are you running?
Great job, respect
what color is it ? I mean what paint code
love the wheels, what wheels sizes and offset are you running?
Great job, respect
Hey, Just wanted to post this video for those who have not seen it yet! We just got this car done a few short weeks ago and finished up the tune on it.
Here is a quick run down on the parts list
-Streetported 13B Built in House
-Adaptronic PNP ECU Tuned in House
-Turblown Manifold
-JGS 40mm Wastegates
-TIAL BOV
-FFE Fuel Rails
-CJ Motorsports Fuel Hanger(Dual Bosch 044's)
-ID2000 Injectors
-Xcessive LIM
-ETS Intercooler
-Ryewire Harness
-Borgwarner S475 with 6 Blade Billet Wheel
The car still has the stock trans and diff with 92k miles on them.
Shaun's 700whp Mazda Rx-7 - YouTube
Here is a quick run down on the parts list
-Streetported 13B Built in House
-Adaptronic PNP ECU Tuned in House
-Turblown Manifold
-JGS 40mm Wastegates
-TIAL BOV
-FFE Fuel Rails
-CJ Motorsports Fuel Hanger(Dual Bosch 044's)
-ID2000 Injectors
-Xcessive LIM
-ETS Intercooler
-Ryewire Harness
-Borgwarner S475 with 6 Blade Billet Wheel
The car still has the stock trans and diff with 92k miles on them.
Shaun's 700whp Mazda Rx-7 - YouTube
#42
MILOS7- Thank you. I will have to check with the owner and see what the specs on the wheels and paint code are. It has been awhile since we painted it
Update-The car is being completely redone at the moment. A lot of new changes and upgrades are in the works. It has been down for a few months waiting on a few parts to be made but we are hoping to have it finished up within the next month.
Here is a quick run down of what we changed.
-Haltech Elite 2500
-ProJay Intake Manifold
-1/2"Stud Kit all the way through
-Side Clearanced and Balanced Rotors
-E&J Seals
-Semi PP-Bridge Port
-Flex Fuel and E-85
Update-The car is being completely redone at the moment. A lot of new changes and upgrades are in the works. It has been down for a few months waiting on a few parts to be made but we are hoping to have it finished up within the next month.
Here is a quick run down of what we changed.
-Haltech Elite 2500
-ProJay Intake Manifold
-1/2"Stud Kit all the way through
-Side Clearanced and Balanced Rotors
-E&J Seals
-Semi PP-Bridge Port
-Flex Fuel and E-85
#45
We are not shooting for any specific number. Just wanting to be able to play around on the street with other 8-1000whp cars in Texas. Obviously can not touch the other insane cars down there. But with this new setup though I do not see making over 900whp to be an issue