700 or 1400hp FD?
#27
Scoots FD is for Sale.
US$30,000
Any one want it?
40mm p ports, + street ported primary and secondaries.
Cut down 20B thru bolts.
Needle roller main bearings
6 speed Holinger.
Brembo F50 brakes
NB apex seals
T51 R
711ps
327.3 km/h
http://www3.airnet.ne.jp/takayama/scoot.html
I made as web page on their circuit version and it has basically the same engine. You can see the Needle roller main bearings.
http://www.geocities.com/fdkai2000/tsukuba.htm
US$30,000
Any one want it?
40mm p ports, + street ported primary and secondaries.
Cut down 20B thru bolts.
Needle roller main bearings
6 speed Holinger.
Brembo F50 brakes
NB apex seals
T51 R
711ps
327.3 km/h
http://www3.airnet.ne.jp/takayama/scoot.html
I made as web page on their circuit version and it has basically the same engine. You can see the Needle roller main bearings.
http://www.geocities.com/fdkai2000/tsukuba.htm
#28
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Originally posted by FD
Scoots FD is for Sale.
US$30,000
Any one want it?
40mm p ports, + street ported primary and secondaries.
Cut down 20B thru bolts.
Needle roller main bearings
6 speed Holinger.
Brembo F50 brakes
NB apex seals
T51 R
711ps
327.3 km/h
http://www3.airnet.ne.jp/takayama/scoot.html
I made as web page on their circuit version and it has basically the same engine. You can see the Needle roller main bearings.
http://www.geocities.com/fdkai2000/tsukuba.htm
Scoots FD is for Sale.
US$30,000
Any one want it?
40mm p ports, + street ported primary and secondaries.
Cut down 20B thru bolts.
Needle roller main bearings
6 speed Holinger.
Brembo F50 brakes
NB apex seals
T51 R
711ps
327.3 km/h
http://www3.airnet.ne.jp/takayama/scoot.html
I made as web page on their circuit version and it has basically the same engine. You can see the Needle roller main bearings.
http://www.geocities.com/fdkai2000/tsukuba.htm
#29
Old [Sch|F]ool
So the tertiary ports are 40mm in diameter... *scribbles notes*
BTW - What's up with "F50 brakes"?? That doesn't say very much... all it says is they ordered parts from Brembo and they're the same units they put on F50s... and I KNOW you can get better brakes than what's on an F50 I bet they're not even liquid-cooled...
BTW - What's up with "F50 brakes"?? That doesn't say very much... all it says is they ordered parts from Brembo and they're the same units they put on F50s... and I KNOW you can get better brakes than what's on an F50 I bet they're not even liquid-cooled...
#31
Old [Sch|F]ool
From what I've seen, they go perfectly horizontally into the rotor housings and the port's closing is at approximately 75-80 degrees ABDC, assuming that the side ports close at 70degABDC. (see top pic at http://www.geocities.com/fdkai2000/scoot.htm ) I'd personally try to make mine lower, for better torque at lower RPM. Big fat torque curves are *nice*.
#32
Eats, Sleeps, Dreams Rotary
iTrader: (2)
VCD
For those of you who want a copy of the VCD, it's $15 with shipping. There are total of 3 CD's and the video are in the AVI format. The video has 1500 MB so I don't have any place to host it. I don't know how to convert it to a smaller format either so that's the way it is. In this video, you will see, Scoot RX-7 on dyno and doing 215 mph, RE Amemiya GT car's walk around and going on the track, FEED FC, Racing Beat RX-7, and some other RX-7 stuff. The video is around 60 min. If you want a copy, paypal $15 to rotaryextreme@aol.com. The VCD's will be sent to your paypal confirmed address by USPS priority mail. For people not living in the US, paypal $25, the VCD's will be sent by USPS global priority mail.
Chuck
Chuck
#34
Banned. I got OWNED!!!
Join Date: Feb 2001
Location: Canada
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
I posted the 1999 Best Motoring v10 ( Suzuka Circuit ) on KaZaA ... can someone do the same who has the video ( without renaming it )
And it would be nice if Node posted this VCD when he gets it ....
And it would be nice if Node posted this VCD when he gets it ....
#35
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Originally posted by Project RX-7
I posted the 1999 Best Motoring v10 ( Suzuka Circuit ) on KaZaA ... can someone do the same who has the video ( without renaming it )
And it would be nice if Node posted this VCD when he gets it ....
I posted the 1999 Best Motoring v10 ( Suzuka Circuit ) on KaZaA ... can someone do the same who has the video ( without renaming it )
And it would be nice if Node posted this VCD when he gets it ....
And I highly doubt I'll distribute any of this at all.
#38
700WHP!!!
There is a vid of a 700whp fd on my website....running in excess of 30+psi of boost!! www.turbostreetfighter.com under the 'movies' section
#39
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Re: 700WHP!!!
Originally posted by turbostreetfighter
There is a vid of a 700whp fd on my website....running in excess of 30+psi of boost!! www.turbostreetfighter.com under the 'movies' section
There is a vid of a 700whp fd on my website....running in excess of 30+psi of boost!! www.turbostreetfighter.com under the 'movies' section
I still can't find the "other" video
That one is 9mb
I'm looking for the 5mb one.
Maybe some speed runs or whatever
#41
Eats, Sleeps, Dreams Rotary
iTrader: (2)
That white FD which has the RE Amemiya GT widebodykit and Scoot hood is not the Scoot Sports FD. That one is made by Revolution Motorsports. The car is repainted to silver now. I saw it at Tokyo Auto Salon in person.
Chuck
Chuck
Originally posted by FD
Scoots FD is for Sale.
US$30,000
Any one want it?
40mm p ports, + street ported primary and secondaries.
Cut down 20B thru bolts.
Needle roller main bearings
6 speed Holinger.
Brembo F50 brakes
NB apex seals
T51 R
711ps
327.3 km/h
http://www3.airnet.ne.jp/takayama/scoot.html
I made as web page on their circuit version and it has basically the same engine. You can see the Needle roller main bearings.
http://www.geocities.com/fdkai2000/tsukuba.htm
Scoots FD is for Sale.
US$30,000
Any one want it?
40mm p ports, + street ported primary and secondaries.
Cut down 20B thru bolts.
Needle roller main bearings
6 speed Holinger.
Brembo F50 brakes
NB apex seals
T51 R
711ps
327.3 km/h
http://www3.airnet.ne.jp/takayama/scoot.html
I made as web page on their circuit version and it has basically the same engine. You can see the Needle roller main bearings.
http://www.geocities.com/fdkai2000/tsukuba.htm
Thread
Thread Starter
Forum
Replies
Last Post