420rwhp 13bppt at 7300rpm and 9psi of boost!!!!!!!!
10-27-08, 04:49 PM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Dec 2007
Location: paradise Florida
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
420rwhp 13bppt at 7300rpm and 9psi of boost!!!!!!!!
and apparently it makes that 9 psi by 3000 rpm, idles easily at 1000 rpm and is very streetable
DOES ANYBODY HAVE ANY INFO ON THIS ENGINE??!!?!?!?!
http://ausrotary.com/viewtopic.php?f...a&hilit=13bppt
DOES ANYBODY HAVE ANY INFO ON THIS ENGINE??!!?!?!?!
http://ausrotary.com/viewtopic.php?f...a&hilit=13bppt
10-27-08, 05:04 PM
#2
Saiga-12 Power!
iTrader: (4)
Join Date: Oct 2004
Location: N of Chicago
Posts: 4,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chaotic_FC
DOES ANYBODY HAVE ANY INFO ON THIS ENGINE??!!?!?!?!
10-27-08, 06:45 PM
#3
NICE, didn't you read the thread link you posted?????
"Now, if anyone is interested in an engine like this:
(these arnt the specs of the engine above either)
13B PP block, Guru 2 peice crank, guru stud kit, NRS Apex seals, modified oil system, 20mm sump plate, intake system with sinlge 100mm throttle body on custom plenum, fuel rails, endelie mechanical fuel pump, injectors, fuel regs and all fuel lines plumbed up, should be good for 900HP
approx $22000NZ depending on exact specs "
Must be simular, or why would he post those??
I read GT42 also
~Mike...........
"Now, if anyone is interested in an engine like this:
(these arnt the specs of the engine above either)
13B PP block, Guru 2 peice crank, guru stud kit, NRS Apex seals, modified oil system, 20mm sump plate, intake system with sinlge 100mm throttle body on custom plenum, fuel rails, endelie mechanical fuel pump, injectors, fuel regs and all fuel lines plumbed up, should be good for 900HP
approx $22000NZ depending on exact specs "
Must be simular, or why would he post those??
I read GT42 also
~Mike...........
Last edited by RacerXtreme7; 10-27-08 at 06:47 PM.
10-27-08, 08:12 PM
#6
You found the thread and didint event ake the time to read it?
"13B PP block, Guru 2 peice crank, guru stud kit, NRS Apex seals, modified oil system, 20mm sump plate, intake system with sinlge 100mm throttle body on custom plenum, fuel rails, endelie mechanical fuel pump, injectors, fuel regs and all fuel lines plumbed up, should be good for 900HP"
"13B PP block, Guru 2 peice crank, guru stud kit, NRS Apex seals, modified oil system, 20mm sump plate, intake system with sinlge 100mm throttle body on custom plenum, fuel rails, endelie mechanical fuel pump, injectors, fuel regs and all fuel lines plumbed up, should be good for 900HP"
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
