I took my car to the dyno day meet in sarasota. my car dyno 338 whp @7350 rpm 244 max torque @ 6900 rpm. engine is half bridge and fuel injected with a Turbonetics BB t72 @ 12 lbs of boost


http://www.youtube.com/watch?v=_n6loTAmaHw

 

what kind of fuel injection system are you using?

 

RB intake, ACCEL TB and (4) 1100 injectors with a microtech

 

Nice set up

 

great results! are you running the stock tranny or a T2 unit? how is it on the road? i ask because i thought i heard some "funkiness" in the mid-RPM range, but i'm not sure if it was just the audio. anyway, i think it's an awesome little SA. good job.

i've got a question though, do your injectors discharge above or below the throttle plates? i'm just curious because it looks quite similar to the Autonomics unit, that's all.

 

yes T2 tranny with RB flywheel and clutch and pp. i recorded the dyno with my i phone and i gues it got to loud for the phone to record it

dischard above the throttle plate

 

here is a better video by pito13b


http://www.youtube.com/watch?v=Lw3VAALOH4M

 

props to the Puerto Ricans

 

Dope

 

That's a lot of power in a car that light, I'll bet you sneak up on some people

 

Was there for this...very nice.

 

Put some boost into it!

Theres another 100+rwhp waiting for you, just need a couple hundred more rpm and 8-10psi more boost

 

yep!!!! especially loud V8 `s

 

http://www.youtube.com/watch?v=dxaaI0QgFUI http://www.youtube.com/watch?v=Lw3VAALOH4M

 

nice hp numbers for low boost.

friend of mine is pushing 389 on his 12A at 18psi beating on the car for over 4 years and still going strong with bridge port, t70 and ems ecu, pump fuel.

 

awesome

 

thanks! i barely drive the car probably less than 500 miles a year and the thirsty bridge turbo drinks a full tank of car in about 120 miles and my GSLSE is the other way around it last forever!!!!

 

very impressive. I always wanted to build up the 12a and get some power out of it like yours

 

you wouldn't happen to have a part number for that tb assembly would you?

 

DFI 74135B


DFI #310-74135B
Digital Fuel Injection (DFI) TBI SYS 4 BBL W/O ELECT.
$387.99 Ships 01/09/13 *
Click for JEGS Online Price Match

 

Also what are you doing for a tps signal for the microtech. Im doing a 6 port turbo on my gsl-se, running a microtech lt-10s

 

im using a GM TPS

 

Is there a mounting location on the tb itself or did you have to make a bracket? The reason i ask is because the description says "no electronics".

 

it says no electronics because it doesnt come with it you could order http://www.jegs.com/i/DFI/310/74202S2/10002/-1 it cones with tps but it cost more. on mine the tps fits without bracket

 

I'm going to take better pictures of mine