12 A turbo dyno 338 WHP
2 Attachment(s)
I took my car to the dyno day meet in sarasota. my car dyno 338 whp @7350 rpm 244 max torque @ 6900 rpm. engine is half bridge and fuel injected with a Turbonetics BB t72 @ 12 lbs of boost
http://www.youtube.com/watch?v=_n6loTAmaHw |
what kind of fuel injection system are you using?
|
1 Attachment(s)
Originally Posted by arghx
(Post 10417743)
what kind of fuel injection system are you using?
RB intake, ACCEL TB and (4) 1100 injectors with a microtech |
Nice set up
|
great results! are you running the stock tranny or a T2 unit? how is it on the road? i ask because i thought i heard some "funkiness" in the mid-RPM range, but i'm not sure if it was just the audio. anyway, i think it's an awesome little SA. good job.
i've got a question though, do your injectors discharge above or below the throttle plates? i'm just curious because it looks quite similar to the Autonomics unit, that's all. |
Originally Posted by diabolical1
(Post 10419497)
great results! are you running the stock tranny or a T2 unit? how is it on the road? i ask because i thought i heard some "funkiness" in the mid-RPM range, but i'm not sure if it was just the audio. anyway, i think it's an awesome little SA. good job.
i've got a question though, do your injectors discharge above or below the throttle plates? i'm just curious because it looks quite similar to the Autonomics unit, that's all. dischard above the throttle plate |
|
props to the Puerto Ricans
|
Dope :icon_tup:
|
That's a lot of power in a car that light, I'll bet you sneak up on some people :D
|
Was there for this...very nice.
|
Put some boost into it!
Theres another 100+rwhp waiting for you, just need a couple hundred more rpm and 8-10psi more boost |
Originally Posted by GoodfellaFD3S
(Post 10420348)
That's a lot of power in a car that light, I'll bet you sneak up on some people :D
yep!!!! especially loud V8 `s :egrin: |
|
nice hp numbers for low boost.
friend of mine is pushing 389 on his 12A at 18psi beating on the car for over 4 years and still going strong with bridge port, t70 and ems ecu, pump fuel. |
awesome
|
Originally Posted by FC3S1991
(Post 11012262)
nice hp numbers for low boost.
friend of mine is pushing 389 on his 12A at 18psi beating on the car for over 4 years and still going strong with bridge port, t70 and ems ecu, pump fuel. |
very impressive. I always wanted to build up the 12a and get some power out of it like yours
|
you wouldn't happen to have a part number for that tb assembly would you?
|
Originally Posted by rotorhead_izzy
(Post 11331749)
you wouldn't happen to have a part number for that tb assembly would you?
DFI #310-74135B Digital Fuel Injection (DFI) TBI SYS 4 BBL W/O ELECT. $387.99 Ships 01/09/13 * Click for JEGS Online Price Match |
Also what are you doing for a tps signal for the microtech. Im doing a 6 port turbo on my gsl-se, running a microtech lt-10s
|
2 Attachment(s)
|
Is there a mounting location on the tb itself or did you have to make a bracket? The reason i ask is because the description says "no electronics".
|
Originally Posted by rotorhead_izzy
(Post 11333361)
Is there a mounting location on the tb itself or did you have to make a bracket? The reason i ask is because the description says "no electronics".
|
I'm going to take better pictures of mine
|
All times are GMT -5. The time now is 10:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands