FD3S: KS-Auto Burnout Style Full Aero Kit ...... Now Available.
#576
Non Runner
iTrader: (3)
Wanted to post a couple pics with the burnout kit I got. Got the fenders, bumper, sides. Everything but the rear bumper. Also added the CF fender vents and low profile wing that I got from Ken as well. Going to pick up a diffuser from you in a couple weeks as soon as I can decide on the Sanai or Pro... Thanks!
Wheel Specs:
Rear: 19/10.5/+22
Front: 19/9.5/+22
Tires:
Rear: 275/35/19
Front: 235/35/19
Thanks for the advise on the wheels Ken. They were pretty much spot on. Should have probably gone a little more stretched on the rear so I can drop a little more. But I'm pretty happy with the way it sits now.
Wheel Specs:
Rear: 19/10.5/+22
Front: 19/9.5/+22
Tires:
Rear: 275/35/19
Front: 235/35/19
Thanks for the advise on the wheels Ken. They were pretty much spot on. Should have probably gone a little more stretched on the rear so I can drop a little more. But I'm pretty happy with the way it sits now.
#578
FD + 2JZGTE = WIN! **D
iTrader: (19)
I want to go 19" with my Burnrout fenders, but I don't want them sticking out too far. I don't want to have to go with a slimmer tire, and have it be stretched.
I wanna run 245's on the front, and 285-295's on some 18X10 or 19X9.5/19X10's for the rear.
It looks like I need to go closer to +25 or higher offset, for them to be a little more tucked in..
#581
#582
Be a Hero...Punch a Koala
Join Date: Aug 2005
Location: Evansville, IN
Posts: 1,022
Likes: 0
Received 0 Likes
on
0 Posts
I'm more interested in the offset of those rims.
I want to go 19" with my Burnrout fenders, but I don't want them sticking out too far. I don't want to have to go with a slimmer tire, and have it be stretched.
I wanna run 245's on the front, and 285-295's on some 18X10 or 19X9.5/19X10's for the rear.
It looks like I need to go closer to +25 or higher offset, for them to be a little more tucked in..
I want to go 19" with my Burnrout fenders, but I don't want them sticking out too far. I don't want to have to go with a slimmer tire, and have it be stretched.
I wanna run 245's on the front, and 285-295's on some 18X10 or 19X9.5/19X10's for the rear.
It looks like I need to go closer to +25 or higher offset, for them to be a little more tucked in..
#585
Be a Hero...Punch a Koala
Join Date: Aug 2005
Location: Evansville, IN
Posts: 1,022
Likes: 0
Received 0 Likes
on
0 Posts
I'm having the wheels P/C'd a different color at the moment and getting the front and rear bumpers fixed.....if the rear bumper (got smacked while it was parked by a fork lift) is done for I'm prolly going back to stock and adding a rear diffuser
#587
Well gawd damn...
iTrader: (3)
Very nice car. What kind of wheels are those? Looks like either TE37s or the Varrstoen ES 2.2.2s.
Wanted to post a couple pics with the burnout kit I got. Got the fenders, bumper, sides. Everything but the rear bumper. Also added the CF fender vents and low profile wing that I got from Ken as well. Going to pick up a diffuser from you in a couple weeks as soon as I can decide on the Sanai or Pro... Thanks!
Wheel Specs:
Rear: 19/10.5/+22
Front: 19/9.5/+22
Tires:
Rear: 275/35/19
Front: 235/35/19
Thanks for the advise on the wheels Ken. They were pretty much spot on. Should have probably gone a little more stretched on the rear so I can drop a little more. But I'm pretty happy with the way it sits now.
Wheel Specs:
Rear: 19/10.5/+22
Front: 19/9.5/+22
Tires:
Rear: 275/35/19
Front: 235/35/19
Thanks for the advise on the wheels Ken. They were pretty much spot on. Should have probably gone a little more stretched on the rear so I can drop a little more. But I'm pretty happy with the way it sits now.
#588
Senior Member
iTrader: (8)
Join Date: Aug 2004
Location: Land O Lakes, FL
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
I took a few pictures of an Rx7 with our fenders built in. Molding on the rear fenders is probably the hardest part of putting on this particular kit. Not every shop does it the same way either. I don't think I've seen a car do it the same way the original Burnout car has it. In the original Burnout Rx7, you can see a crease in the rear flare. More distinction. Most of what I've seen has been more of a blend to the curvature of the FD rear quarters.
Wheel Specs:
19 inch SSR MS1 Rear: 19x11 +22 275/30/19 Front: 19x9.5 + 18 tire size.. unknown.
as you can see.. he still has alot more room for more tire. I know he can go at least 295 in the rear with an 11 inch wide wheel. Enjoy
Ken
I took a few pictures of an Rx7 with our fenders built in. Molding on the rear fenders is probably the hardest part of putting on this particular kit. Not every shop does it the same way either. I don't think I've seen a car do it the same way the original Burnout car has it. In the original Burnout Rx7, you can see a crease in the rear flare. More distinction. Most of what I've seen has been more of a blend to the curvature of the FD rear quarters.
Wheel Specs:
19 inch SSR MS1 Rear: 19x11 +22 275/30/19 Front: 19x9.5 + 18 tire size.. unknown.
as you can see.. he still has alot more room for more tire. I know he can go at least 295 in the rear with an 11 inch wide wheel. Enjoy
Ken
#592
ls1oo7
Spinner
*
Trader Score: (0)
Is anyone running a 19x10 front rim ? The rims I'm getting built are only in 8 or 10 inches wide and all measurements are done in backspace not offset so if anyone knw a the proper offset for a 10" wide front rim please let me knw from a ruff estimate looks like I will be ok with 6" backspace with looks like 19x10 +26
Info needed ASAP ! Thanks !!
Spinner
*
Trader Score: (0)
Is anyone running a 19x10 front rim ? The rims I'm getting built are only in 8 or 10 inches wide and all measurements are done in backspace not offset so if anyone knw a the proper offset for a 10" wide front rim please let me knw from a ruff estimate looks like I will be ok with 6" backspace with looks like 19x10 +26
Info needed ASAP ! Thanks !!
#595
shine ks burnout kit
Pics on white FD3S without Front and Rear Fenders....
Item No./Description/Price
(FD3S-FB-B) Front Aero Bumper $450
(FD3S-SS-B) Sideskirts $350
(FD3S-RB-B) Rear Aero Bumper $400
(FD3S-FFND-B) Front Wide Fenders (20-25mm wide depending on how much of the inner lip is trimmed) $450 per pair.
(FD3S-RFND-B) Rear Fender Flares (20-25mm wide) $150 per pair
Recommended Products:
(FD3S-UND-S) Front Aero Bumper Undertray. May require cutting/trimming depending on style of bumper. FRP $115 Carbon $215
(FD3S-Vents-OEM) Carbon Fiber (Plain or Twill) $100
Useful links to other sites with info:
http://shineautoproject.com/forum/up...splay.php?f=21
POST QUALITY FINISHED PRODUCT PICS HERE!
http://shineautoproject.com/forum/up...thread.php?t=8
Shipping Info:
http://shineautoproject.com/forum/up...splay.php?f=86
Ordering Info:
http://shineautoproject.com/forum/up...hread.php?t=40
*PLEASE FEEL FREE TO POST PICS, ASK QUESTIONS, DISCUSS, ETC....
#599
#600