Savannah RX-7 Club
#2676
Want more Boost!!!!
iTrader: (1)
I call shotgun on the driver window switch and passanger door handle...ed knows my address...also if available..both front bumper park lights unless u have a 99 front end on it..but better after the strip if you have pics post them..and any aftermarket exhaust? mines has a big whole in it...lol...the beer is not a problemm..how does a keg sound...let me know price of what ever you guys want and ill send it with the shipping money...thanks brother you are the man
Gonna have a free for all party on my 3rd gen. Shes coming apart. All I want is the drive train and wiring harness. Everything else must go! So Edd and I will be working on it all week taking it apart. If there is anything you want, let me know. Its free if you come get it, otherwise will cost you beer and shipping if you want it to go somewhere lol!
Frisco, how you holding up? Are you in dire need for the calipers yet? or can you hold off till the 21st?
Frisco, how you holding up? Are you in dire need for the calipers yet? or can you hold off till the 21st?
#2677
Back to the DrawingBoard.
Thread Starter
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
best movie to see this summer, in DVD will be released in July.....
http://www.youtube.com/watch?v=EasHf...eature=related
http://www.youtube.com/watch?v=EasHf...eature=related
#2678
Some jdm engines that dew come with the harness uncut can be retaped and stretch over to the other side. I’ve done it on a 3rd gen before. You have to make sure the engine comes with complete harness/coils and ecu. Then you need a wiring schematic of a Cosmo 20b car and that is super hard to find. Finally you splice the rest of the plugs that work the Cosmo ecu like the power/fuel pump/ac and you know what I mean.
#2679
dark side i sense in him
1- Front Calipers (mine are almost gone) first the rears and now this ones
2- shifter console, just the console
3- the handles for the inside doors, the ones that hold the switches (they are attached to the door cover) both sides
4- the glove box door (mine snap)
5- the rear hatch cover with out the Bose speaker holes
6- the rear tail lights (left and right not the center) mine someone hit them and crack them, yea thats why i dont take the car to work anymore
7- rear view mirror (mine felt off LOL dont ask me why i dont use that bitch)
8- and the gauge cluster (i will change it to white gauges and LED lights) is time on that one
Here is what is gone so far, and I got this PM right when I posted so sorry *****. I cant do the door handle. But the window switches are no problem.
I have the stock from bumper so the bumper lights are no problem. And I do believe Edd has laid claim to the exhaust. It is only a catback aftermarket.
Javier, PM sent
2- shifter console, just the console
3- the handles for the inside doors, the ones that hold the switches (they are attached to the door cover) both sides
4- the glove box door (mine snap)
5- the rear hatch cover with out the Bose speaker holes
6- the rear tail lights (left and right not the center) mine someone hit them and crack them, yea thats why i dont take the car to work anymore
7- rear view mirror (mine felt off LOL dont ask me why i dont use that bitch)
8- and the gauge cluster (i will change it to white gauges and LED lights) is time on that one
Here is what is gone so far, and I got this PM right when I posted so sorry *****. I cant do the door handle. But the window switches are no problem.
I have the stock from bumper so the bumper lights are no problem. And I do believe Edd has laid claim to the exhaust. It is only a catback aftermarket.
Javier, PM sent
#2680
Back to the DrawingBoard.
Thread Starter
iTrader: (32)
Join Date: Aug 2004
Location: Va
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Some jdm engines that dew come with the harness uncut can be retaped and stretch over to the other side. I’ve done it on a 3rd gen before. You have to make sure the engine comes with complete harness/coils and ecu. Then you need a wiring schematic of a Cosmo 20b car and that is super hard to find. Finally you splice the rest of the plugs that work the Cosmo ecu like the power/fuel pump/ac and you know what I mean.
http://foxed.ca/foxed/index.php?page=rx7manual
#2683
Some jdm engines that dew come with the harness uncut can be retaped and stretch over to the other side. I’ve done it on a 3rd gen before. You have to make sure the engine comes with complete harness/coils and ecu. Then you need a wiring schematic of a Cosmo 20b car and that is super hard to find. Finally you splice the rest of the plugs that work the Cosmo ecu like the power/fuel pump/ac and you know what I mean.
well with the motor i have it was cut https://www.rx7club.com/20b-forum-95/20b-swap-885947/ but i bought a full one seperatly" minus the emissions wiring" everything was there ,as for the three things i needed i had to order them seperate because the shop had ordered the 20b through tiger japan instead of their main w/h so i didnt get the front cut from them...that came with everything...
Last edited by Sabora; 06-15-10 at 10:02 AM.
#2685
Want more Boost!!!!
iTrader: (1)
Ian just checking but you said you dont have the inside door handles..? I need the passenger exterior door handle...in all actuality the tab that you lift to open the door..as for the exhaust not a problem...I can always patch mines...as for everything else on my list..lol..I really need it...let me know about the beer man...Tipooo make sure you get all the loose ends on your project cause hopefully mines will be your first 3rd gen 20b install...jajaja..that will be my ultimate goal...everybody else whats cooking...and just in case ...happy fathers day to all my rotor head family...I know a little to early..but this is free get drunk and spouses can bitch weekend...so have fun...lol
#2687
Stuck in the slow lane
iTrader: (2)
Join Date: Oct 2008
Location: Riverside, CA
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
lol I hate looking at this site stuck in the **** box so many deals and i can get nothing.
question i know its been answered before but do you think its worth buy a 20b on ebay i mean 3 grand seems do able if the motor isnt a lemon?
question i know its been answered before but do you think its worth buy a 20b on ebay i mean 3 grand seems do able if the motor isnt a lemon?
#2688
Stuck in the slow lane
iTrader: (2)
Join Date: Oct 2008
Location: Riverside, CA
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
oh yeah im gonna try and piece my car back to somewhat stock but still gonna upgrade things would anyone have a black 2nd gen carpet set? lol or a stock ish 1st gen gsl se lol.... ok shoot throw in a rx3 too been eyeing those too
#2689
Couldnt warranty any thing from the internet. JDM engines are hit or miss. you could pay 4500 for one and it might be a lemon or you could pay 2600 for the same thing and it might also be a lemon. I look at it as the luck of the draw. Sorry man Nature of the beast.
#2693
Rotary Freak
Ian just checking but you said you dont have the inside door handles..? I need the passenger exterior door handle...in all actuality the tab that you lift to open the door..as for the exhaust not a problem...I can always patch mines...as for everything else on my list..lol..I really need it...let me know about the beer man...Tipooo make sure you get all the loose ends on your project cause hopefully mines will be your first 3rd gen 20b install...jajaja..that will be my ultimate goal...everybody else whats cooking...and just in case ...happy fathers day to all my rotor head family...I know a little to early..but this is free get drunk and spouses can bitch weekend...so have fun...lol
Holly
#2694
If it's fast I'm There
iTrader: (24)
Join Date: Nov 2005
Location: Waxhaw, NC
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Here is the link to sell your OEM catback
https://www.rx7club.com/3rd-generation-rx-7-1993-2002-parts-99/stock-catback-cat-will-pay-good-%24%24%24-903598/
#2695
Rotary Freak
#2696
#2697
#2698
Want more Boost!!!!
iTrader: (1)
Hey Holly it was me that has the hole in my exhaust..mines a racing beat single tip..so yes I was looking more into the aftermarket side..thanks for the offer..Darth its almost teardown time and I dont have the paypal address so I can send the drinking money...I know you guys will get thirsty..lol...Ed you got my number man...now also what I do need and if someone has for sale...4.10 gears..mines used to be auto...I do believe they are 3.90 or so..Ian PM sent..
#2699
dark side i sense in him
I am at edds house now and starting the teardown! Its gonna be ****** hot! All are welcome to show up, help, or just to B.S. with me while Edd is at work!