Tim Benton

iTrader: (1)

NASA is having a track event at Road Atlanta on Saturday (18th) and Sunday (19th) of March. There are a number of guys of the RX-8 club that have already signed up and I signed up yesterday. Just throwing it out there for those interested in tracking the car in a controlled environment.

Tim

tom jelly

do you have any contact info on for the people running this event? I'm new to the area - used to do a lot of track days at Gingerman and Road America and have been looking for a group to go with at Road Atlanta because I'm only 1/2 hour away from there. Need to iron out the kinks in new engine/turbos in my FD.

Tom

HoosierDaddy

iTrader: (1)

Tom,

Try www.nasa-southeast.com - the 2006 schedule is on the home page.

For more info on the organization www.nasaproracing.com

Look for info on HPDE - High Performance Driver Education, unless you're a licensed racer already. You do have to join to participate, but it's arranged so you can do it all online. I signed up last year and took my FD to Road Atlanta last March, and I'm planning on doing it again this year (see you there, Tim If you haven't driven at Road Atlanta, I can tell you it is well worth the price.

NeoTuri

iTrader: (2)

I have to wait until the 2006 calender for auto-x is out before I commit.

Tim Benton

iTrader: (1)

Troy,

You getting a room?

Tim

Gilgamesh

i got an ITA rx3, im planing on getting a scca liscense, what all is need to race?
fire suits?
age limitation?

PureMdMa

iTrader: (1)

Damn I wish the car was gonna be finished by then but I highly doubt it, so im probably not gonna be able to make it. Im planning on going to deals gap meet though as all of you should.

L8r

Tim Benton

iTrader: (1)

Need any help with it?

Tim

tom.jelly

Did some emailing back and forth with nasa, seems like it would be worthwhile & something along the lines of the drivers schools BMWCCA used to have at Road America. Do you guys know any other people that do track days with just a few run groups? The Nasa people said there would probably be 3) 20-30 min runs each day, 2 days- it would be nice to find a group where you could get all that in 1 day. They used to have 3 groups rotating every 20 min at Gingerman with only an hour off for lunch- you'd go home exhausted after 7 or 8 runs, and it was only around $150 for the day! Great track there but pretty bare bones, I would imagine Atlanta costs a lot more to rent....

tom

311unity13B

ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm SEBRING???? duh, that week!!!!!!!!!!

tom.jelly

I've heard of the deals gap thing, you are talking about PA, right? What kind of event are they having? I saw a vid of some guy in an FC running thru some nice wooded roads there, but that's one of the reasons I moved down here-129 from my place to Blairsville is unbelievable... Used to go to MRR up in wisconsin at Road America which was really nice.
tom

PureMdMa

iTrader: (1)

Tim,
I dont really need any help yet, im still trying to track down all the parts that I need while I have the engine out. Im looking for a Xcessive oil pan right now mainly. Already got some knight sports RF420 Twins that are going in.

Zach,
Yeah thats right I didnt catch that it was the same weekend, oops. How are you planing to get down there now? I might have a WRX wagon to take by then but I dont think I could take the Tahoe its getting some wierd symtoms in the tranny.

L8r

PureMdMa

iTrader: (1)

Deals is in NC & TN, we are making this the 2nd anual event. Check it out last year we had a blast.

https://www.rx7club.com/deals-gap-rotary-rally-157/

311unity13B

umm, josh and I are both mechanics and a good friend of ours is a transmission guy

tom.jelly

How much is that pan? it was the only thing on their site w/o a price (at least when I looked)

Tom

Tim Benton

iTrader: (1)

Around the $350 range or was at one time.

Tim

tom.jelly

Until this afternoon I thought I would need one- a few days ago I decided to investigate my oil leak and it turns out a nub on the aluminum driver's side motor mount was sitting on a pan bolt, and was preventing the mount from sitting flat on the pan, causing the leak. I milled the nub off and put a recess in it for the pan bolt so it would sit flat and bolted everything together and as of today the car still has no drips underneath. I read somewhere else on the forum that the nub was there from the factory so they didn't have to put in that particular pan bolt on the assembly line, probably because the mount blocked it, and that later or replacement mounts don't have it. Its pretty hard to see if the mount is sitting on the nub unless you look at it from in between the pan and the engine cradle crossmember, which is really tough unless you are into yoga or want a neck cramp! No way I would go to the trouble of pulling the pan unless it was going to get replaced with the cast one to end the possibility of any leak ever happening again.

PureMdMa

iTrader: (1)

Zach, I dont need any mechanical help, I can take care of that all myself.

Tim, If you can get that pan for $350 let me know cause the cheapest I can find is $425.

311unity13B

we gotta figure out someway to get there and bring all our stuff, i doubt you can get the motorhome, but try to get the tahoe, it'd be a big help, since we dont own the red van anymore, mom sold it

PureMdMa

iTrader: (1)

Yeah I remembered that, thats why I was thinking of other options. How many people do we have riding down this year?

L8r

Speedball

Tim,

I've just signed up. Never been to Road Atlanta. Its good to have a fellow 3rd gen on the track - those pesky RX8's were buzzing all over Roebling when I was there!

Mark

Tim Benton

iTrader: (1)

I'll try to keep this thread updated with info on what hotel, etc.

Looks like about 6 or 7 8's and you makes 3 FD's so far.

Troy, what car you bringing?

Tim

Tim Benton

iTrader: (1)

Looks like a good group of rotary powered cars will be there. The Best Western seems to be the spot of choice in Brasleton. Go to the bestwestern.com site, plug in the town and I think the address is 303 something or another. It's the only one in the area.

So who is still going?

Tim

NeoTuri

iTrader: (2)

I have... prior engagements

Tim Benton

iTrader: (1)

Anyone else still making it?

The RX-8 guys have a paddack area setup now so we can park with those guys. So far, according to their list, we have 12 people going in rotary powered cars. Although that number didn't include anyone except me in it from this site.

Tim