Gaby Skern top tuner in Orlando FL Oct 17th
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: Titusville, FL
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Gaby Skern top tuner in Orlando FL Oct 17th
Gaby Skern will be tuning at an Orlando Fl shop called 2fastautosports on forsyth 2720 Unit 305 Winter Park, FL 32792 they have a dynojet 224x. Gaby is responsible for tunning the fastest 13b in the world Sporty 7.34 Sec at 180mph 1/4 mile time. Papote 7.44 and many other top rotary cars in US and PR. Call 407-475-0900 to talk to the guy in the shop I beleive his name is Giovanni. I hope the information is usefull for you guys.
__________________
__________________
#4
does any one have info besides/or shop on prices, what is needed, etc. so GABY can tune.
I have a TII modded with stuff and SAFCII that runs the fuel setup. lmk You can pm or I will check back here
thanx/gracias
I have a TII modded with stuff and SAFCII that runs the fuel setup. lmk You can pm or I will check back here
thanx/gracias
#5
I brake boost
Join Date: Aug 2003
Location: Orlando
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by robrxray
does any one have info besides/or shop on prices, what is needed, etc. so GABY can tune.
I have a TII modded with stuff and SAFCII that runs the fuel setup. lmk You can pm or I will check back here
thanx/gracias
I have a TII modded with stuff and SAFCII that runs the fuel setup. lmk You can pm or I will check back here
thanx/gracias
#6
Gaby Skern kicks Steve kans *** anyday in tunning. Also another important fact about Gaby. Last week in australia he set a new 13b record over there with a datsun 1200 from Puerto Rico he tunes called "Steidel" with a 7.62,
#7
Rotary Enthusiast
Join Date: Feb 2004
Location: New york
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FD Rey
He could probably tune your SAFC but you're really limited as to what you will expect out of that. Gaby specializes in Microtech and Haltech computers. I'll be attending this tuning session for sure. I want to see what my car does on high boost and race gas
-dj
Trending Topics
#10
thanx Rey , r u bringing race gas or do they have it there? i can bring some also if needed.
If Gaby checked how good my car runs and just tweaked on it, to bring out whatever he could that would be great tuning session. Set timing, adjust fuel pressure, etc. Just to get close to perfection as it is. I have new platinum plugs and new wires saved for tuning, and everything else mechanical on car is very low mileage.
If Gaby checked how good my car runs and just tweaked on it, to bring out whatever he could that would be great tuning session. Set timing, adjust fuel pressure, etc. Just to get close to perfection as it is. I have new platinum plugs and new wires saved for tuning, and everything else mechanical on car is very low mileage.
#11
I brake boost
Join Date: Aug 2003
Location: Orlando
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by robrxray
thanx Rey , r u bringing race gas or do they have it there? i can bring some also if needed.
If Gaby checked how good my car runs and just tweaked on it, to bring out whatever he could that would be great tuning session. Set timing, adjust fuel pressure, etc. Just to get close to perfection as it is. I have new platinum plugs and new wires saved for tuning, and everything else mechanical on car is very low mileage.
If Gaby checked how good my car runs and just tweaked on it, to bring out whatever he could that would be great tuning session. Set timing, adjust fuel pressure, etc. Just to get close to perfection as it is. I have new platinum plugs and new wires saved for tuning, and everything else mechanical on car is very low mileage.
#13
silver ghost
iTrader: (11)
Join Date: Sep 2003
Location: Home of the Rolex 24
Posts: 3,061
Likes: 0
Received 5 Likes
on
5 Posts
My stock twins FD is putting down 373 thanks to Gaby. 11.0 afr's on my wideband at WOT all the time! If anyone is looking for the real deal he is it! Rey lets hook up and get to this one. I'll have the ignition! High boost time for u. If dyno time is reasonable. I will strap on just for a check up. G
#15
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
Ok I tried calling twice but no answer or call-back. Could someone please tell him/them that I'm interested? Also anyone who can please pm me with contact info.
I have a Haltech E6X on a
Half-Bridgeported 13b-rew
72lb/160lb injectors
Dual Walbro pumps
Autronic 500r CDI ignition
Master Power T70 turbo p-trim
I have a Haltech E6X on a
Half-Bridgeported 13b-rew
72lb/160lb injectors
Dual Walbro pumps
Autronic 500r CDI ignition
Master Power T70 turbo p-trim
#17
silver ghost
iTrader: (11)
Join Date: Sep 2003
Location: Home of the Rolex 24
Posts: 3,061
Likes: 0
Received 5 Likes
on
5 Posts
Originally Posted by YayeR
Ok I tried calling twice but no answer or call-back. Could someone please tell him/them that I'm interested? Also anyone who can please pm me with contact info.
I have a Haltech E6X on a
Half-Bridgeported 13b-rew
72lb/160lb injectors
Dual Walbro pumps
Autronic 500r CDI ignition
Master Power T70 turbo p-trim
I have a Haltech E6X on a
Half-Bridgeported 13b-rew
72lb/160lb injectors
Dual Walbro pumps
Autronic 500r CDI ignition
Master Power T70 turbo p-trim
#19
Laying Down Rotary Law
more updated info:
Hell be from the 17th thru the 23rd of october
The owner of the dyno is out of the state
but will be back this weekend. I'll get more info
he can tune your E6X no problem
Hell be from the 17th thru the 23rd of october
The owner of the dyno is out of the state
but will be back this weekend. I'll get more info
he can tune your E6X no problem
#20
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
Cool, thanks a lot kabooski. Please keep me updated.
Also, if there's anything else I can do as far as contact information, information about the car, or appointment schedule do let me know.
Also, if there's anything else I can do as far as contact information, information about the car, or appointment schedule do let me know.
Last edited by YayeR; 10-05-06 at 09:10 PM.
#22
I brake boost
Join Date: Aug 2003
Location: Orlando
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SLOW 7
I should be able to make it over to hang out for a while. Rey, you will need to call me and remind me though!