RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   SE RX-7 Forum (https://www.rx7club.com/se-rx-7-forum-35/)
-   -   Gaby Skern top tuner in Orlando FL Oct 17th (https://www.rx7club.com/se-rx-7-forum-35/gaby-skern-top-tuner-orlando-fl-oct-17th-582745/)

masajepr 09-29-06 07:31 PM

Gaby Skern top tuner in Orlando FL Oct 17th
 
Gaby Skern will be tuning at an Orlando Fl shop called 2fastautosports on forsyth 2720 Unit 305 Winter Park, FL 32792 they have a dynojet 224x. Gaby is responsible for tunning the fastest 13b in the world Sporty 7.34 Sec at 180mph 1/4 mile time. Papote 7.44 and many other top rotary cars in US and PR. Call 407-475-0900 to talk to the guy in the shop I beleive his name is Giovanni. I hope the information is usefull for you guys.
__________________

luiml73 09-29-06 11:38 PM

That sucks!!!!! I'm stuck in NYC till Oct22

You guys better take advantage of this rare occasion.

thafox 09-30-06 09:30 AM

damnit damnit damnit why'd it have 2 b on a tuesday when im workin

robrxray 09-30-06 12:39 PM

does any one have info besides/or shop on prices, what is needed, etc. so GABY can tune.
I have a TII modded with stuff and SAFCII that runs the fuel setup. lmk You can pm or I will check back here
thanx/gracias

FD Rey 09-30-06 02:55 PM


Originally Posted by robrxray
does any one have info besides/or shop on prices, what is needed, etc. so GABY can tune.
I have a TII modded with stuff and SAFCII that runs the fuel setup. lmk You can pm or I will check back here
thanx/gracias

He could probably tune your SAFC but you're really limited as to what you will expect out of that. Gaby specializes in Microtech and Haltech computers. I'll be attending this tuning session for sure. I want to see what my car does on high boost and race gas :D

fbdrifterrx7 09-30-06 04:56 PM

Gaby Skern kicks Steve kans ass anyday in tunning. :greenchai Also another important fact about Gaby. Last week in australia he set a new 13b record over there with a datsun 1200 from Puerto Rico he tunes called "Steidel" with a 7.62, :us4allswi

showoff 09-30-06 05:39 PM


Originally Posted by FD Rey
He could probably tune your SAFC but you're really limited as to what you will expect out of that. Gaby specializes in Microtech and Haltech computers. I'll be attending this tuning session for sure. I want to see what my car does on high boost and race gas :D

rember 2 post vids iam very interested in your setup should produce great numbers

-dj

Turbo Timmy 09-30-06 08:55 PM

I'll be in Jersey :(

luiml73 09-30-06 11:04 PM

Nayeliz Starlet- 7.32 @ 182mph Gaby Chassis tunned.
1.087 60 Feet
3.00 330'
4.64 @ 149 1/8
6.08 1000'

robrxray 10-01-06 09:59 AM

thanx Rey , r u bringing race gas or do they have it there? i can bring some also if needed.
If Gaby checked how good my car runs and just tweaked on it, to bring out whatever he could that would be great tuning session. Set timing, adjust fuel pressure, etc. Just to get close to perfection as it is. I have new platinum plugs and new wires saved for tuning, and everything else mechanical on car is very low mileage.

FD Rey 10-01-06 02:01 PM


Originally Posted by robrxray
thanx Rey , r u bringing race gas or do they have it there? i can bring some also if needed.
If Gaby checked how good my car runs and just tweaked on it, to bring out whatever he could that would be great tuning session. Set timing, adjust fuel pressure, etc. Just to get close to perfection as it is. I have new platinum plugs and new wires saved for tuning, and everything else mechanical on car is very low mileage.

I don't know if they will have any race gas there so I'd bring some just in case. I'm filling up my tank before I get there. I'd call the shop and let them know what you have and what you want Gaby to do, etc.

YayeR 10-02-06 06:46 PM

I want part of this. I'll call tomorrow.

G's 3rd Gen 10-03-06 08:05 PM

My stock twins FD is putting down 373 thanks to Gaby. 11.0 afr's on my wideband at WOT all the time! If anyone is looking for the real deal he is it! Rey lets hook up and get to this one. I'll have the ignition! High boost time for u. If dyno time is reasonable. I will strap on just for a check up. G

TII-aholic 10-03-06 09:32 PM

ill be there at least to watch...if not more :)

YayeR 10-04-06 03:21 PM

Ok I tried calling twice but no answer or call-back. Could someone please tell him/them that I'm interested? Also anyone who can please pm me with contact info.

I have a Haltech E6X on a

Half-Bridgeported 13b-rew

72lb/160lb injectors

Dual Walbro pumps

Autronic 500r CDI ignition

Master Power T70 turbo p-trim

kabooski 10-04-06 08:00 PM

I got the shop's owner cell # I'll tell him about your car YaveR NP

G's 3rd Gen 10-04-06 08:32 PM


Originally Posted by YayeR
Ok I tried calling twice but no answer or call-back. Could someone please tell him/them that I'm interested? Also anyone who can please pm me with contact info.

I have a Haltech E6X on a

Half-Bridgeported 13b-rew

72lb/160lb injectors

Dual Walbro pumps

Autronic 500r CDI ignition

Master Power T70 turbo p-trim

Damn. Be fun to watch that set up get dialed in. G

FCrocious 10-04-06 10:00 PM

Wish I could get him around here again. I won't have my haltech until the end of the month!:(
Someone tell gaby I'll buy him lunch? ;)

kabooski 10-05-06 05:53 PM

more updated info:
Hell be from the 17th thru the 23rd of october

The owner of the dyno is out of the state
but will be back this weekend. I'll get more info

he can tune your E6X no problem

YayeR 10-05-06 08:54 PM

Cool, thanks a lot kabooski. Please keep me updated.

Also, if there's anything else I can do as far as contact information, information about the car, or appointment schedule do let me know.

SLOW 7 10-05-06 11:45 PM

I should be able to make it over to hang out for a while. Rey, you will need to call me and remind me though!

FD Rey 10-06-06 02:19 PM


Originally Posted by SLOW 7
I should be able to make it over to hang out for a while. Rey, you will need to call me and remind me though!

No problem. I gotta figure out exactly what day I'll be tuning.

kabooski 10-06-06 07:25 PM

25 PSI? right Rey :D

rxspeed7 10-06-06 07:35 PM

can he tune emanage ultimate? how much also. thanks

FD Rey 10-07-06 01:37 PM


Originally Posted by kabooski
25 PSI? right Rey :D

:cough: 28psi :cough:


All times are GMT -5. The time now is 03:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands