FS: wheels + 1/2 bridge motor in ATL
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Marietta, GA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
FS: wheels + 1/2 bridge motor in ATL
Sold my '7. Time to get rid of some spares. Local pickup only. Payment by cash. Happy to answer serious questions. Everything sold as-is. If you have q? about me, PM Holly, Tim B., Reese or David88vert. Ok, priced to go...
4 x 91 "basket" BBS wheels w/ V700 Victoracers.
4 x 3-piece race wheels.
4 x 205x60x16 Cooper street tires (old, but hold air).
'88 13bt 1/2 bridge short block.
-------------------------------------------------------
4 - '91 factory OEM "basket" BBS wheels with Kuhmo V700 Victoracers. One track day on the tires. These wheels are very light. These are my track day wheels. All are straight. Minor imperfections from normal use. No plastic center caps. $400.
http://www.dynolab.net/zz_steve/zr70-0014.JPG
http://www.dynolab.net/zz_steve/zr70-0015.JPG
http://www.dynolab.net/zz_steve/zr70-0016.JPG
-------------------------------------------------------
4 - 3-piece (yes, they bolt together) wheels with Falken Azenis Sports mounted - tires are gone. All are straight, w/ some minor nicks from normal use. Extremely lightweight. Never on the car. Not recommended for street use. $400
http://www.dynolab.net/zz_steve/zr70-0017.JPG
http://www.dynolab.net/zz_steve/zr70-0018.JPG
http://www.dynolab.net/zz_steve/zr70-0019.JPG
http://www.dynolab.net/zz_steve/zr70-0020.JPG
http://www.dynolab.net/zz_steve/zr70-0021.JPG
--------------------------------------------------------
'88 13bt 1/2 bridge short block - bridged secondaries, extended primaries, race port on exhaust, using Mazdatrix templates. All new Mazda factory seals properly clearanced. New hardened rear stationary gear. RP HD oil press reg. #12 aluminum flywheel and 6-puck ACT clutch w/ ~4k miles. Oil fill is converted to AN fitting. Never in the car. Rebuilt at 63k miles due to water seal leak (no overheating!) Housings are perfect, no scratches, nicks, or flaking. Just normal edge bevel from the corner seals. Twin turbos, intake, and alt not included. Unless, of course you wanna sweeten the deal
$2200.
http://www.dynolab.net/zz_steve/engine/IM000164.JPG
http://www.dynolab.net/zz_steve/engine/IM000167.JPG
http://www.dynolab.net/zz_steve/engine/IM000170.JPG
http://www.dynolab.net/zz_steve/engine/IM001309.JPG
http://www.dynolab.net/zz_steve/engine/IM001311.JPG
Steve C.
-- yeah, that's my car in the avatar. Well, it was my car.
4 x 91 "basket" BBS wheels w/ V700 Victoracers.
4 x 3-piece race wheels.
4 x 205x60x16 Cooper street tires (old, but hold air).
'88 13bt 1/2 bridge short block.
-------------------------------------------------------
4 - '91 factory OEM "basket" BBS wheels with Kuhmo V700 Victoracers. One track day on the tires. These wheels are very light. These are my track day wheels. All are straight. Minor imperfections from normal use. No plastic center caps. $400.
http://www.dynolab.net/zz_steve/zr70-0014.JPG
http://www.dynolab.net/zz_steve/zr70-0015.JPG
http://www.dynolab.net/zz_steve/zr70-0016.JPG
-------------------------------------------------------
4 - 3-piece (yes, they bolt together) wheels with Falken Azenis Sports mounted - tires are gone. All are straight, w/ some minor nicks from normal use. Extremely lightweight. Never on the car. Not recommended for street use. $400
http://www.dynolab.net/zz_steve/zr70-0017.JPG
http://www.dynolab.net/zz_steve/zr70-0018.JPG
http://www.dynolab.net/zz_steve/zr70-0019.JPG
http://www.dynolab.net/zz_steve/zr70-0020.JPG
http://www.dynolab.net/zz_steve/zr70-0021.JPG
--------------------------------------------------------
'88 13bt 1/2 bridge short block - bridged secondaries, extended primaries, race port on exhaust, using Mazdatrix templates. All new Mazda factory seals properly clearanced. New hardened rear stationary gear. RP HD oil press reg. #12 aluminum flywheel and 6-puck ACT clutch w/ ~4k miles. Oil fill is converted to AN fitting. Never in the car. Rebuilt at 63k miles due to water seal leak (no overheating!) Housings are perfect, no scratches, nicks, or flaking. Just normal edge bevel from the corner seals. Twin turbos, intake, and alt not included. Unless, of course you wanna sweeten the deal
$2200.
http://www.dynolab.net/zz_steve/engine/IM000164.JPG
http://www.dynolab.net/zz_steve/engine/IM000167.JPG
http://www.dynolab.net/zz_steve/engine/IM000170.JPG
http://www.dynolab.net/zz_steve/engine/IM001309.JPG
http://www.dynolab.net/zz_steve/engine/IM001311.JPG
Steve C.
-- yeah, that's my car in the avatar. Well, it was my car.
#3
Full Member
Thread Starter
Join Date: Mar 2001
Location: Marietta, GA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dregg100
what size are the three piece rims? how light weight are they?
Cheers,
s
#5
Full Member
Thread Starter
Join Date: Mar 2001
Location: Marietta, GA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dregg100
i just want to know the width and diameter and weight.
16 x 7 wheels.
With the 225x50x16 mounted its 38#.
s
Thread
Thread Starter
Forum
Replies
Last Post