East Tennessee Rotary Club
yeah there will be a meet at the 411 speedway saturday @ 1 pm . If you want to cruz up there with us we will meet at best buy off of cedarbluff exit at 12 pm If you need directions feel free to pm me or coneninja .
Yea I found this http://www.aaroncake.net/RX-7/transfluid.htm
So I might try that tomorrow... if I get brave
So I might try that tomorrow... if I get brave
Thread Starter
Joined: Jan 2004
Posts: 2,910
Likes: 3
From: Maryville, TN
Originally Posted by battle cattle
yea fluid swaps! all around... in a NON sexual way!

I used that method when I switched over to redline, it worked really well although it took me awhile because I used tubing that was too small. I think I ended up cranking it to 50 PSI (at the risk of smelling like MT90 for life.) If you guys need help I'll lend a hand and a compressor.
Damn so no fluid swapping down by the fire? I don't know when we can do it.. I guess you are ready now.. Derrick has to get money. I just got to go get the fluid. I also need to do an oil change and don't you put fluid in the top part of the shifter too? I should probably do that too for good measure.
Oh im working on money right now >.> parts being sold for slightly less than new...even though it is brand spanking new....
I hope to be purchasing several quarts of redline fore both the trans and rear dif >.>
I hope to be purchasing several quarts of redline fore both the trans and rear dif >.>
OK,OK! The Track will be open alllll day! I believe it's the first opening of the year so it might be crowded. Spectators admission is $6 and if your gona run your car it's $15.
We will be meeting @ Circuit CIty near Cedar Bluff (west knox) and heading towards 411 @ 12:30 (Promptly).
For those of you who still want decals for your car, they are $15 a set.
Please let me know asap so we can have them on before the trak! Everyone will also get their club T-shirt that they ordered, and for those of you who haven't ordered, I will have extra! T's are $10 ea.
PLEASE PLEASE PLEASE LET ME KNOW BEFORE THE MEET IF YOU WANT DECALS. E-MAIL ME AT WORK AT redelmo@aol.com, my home address is down.
See you guys Sat W00T!
We will be meeting @ Circuit CIty near Cedar Bluff (west knox) and heading towards 411 @ 12:30 (Promptly).
For those of you who still want decals for your car, they are $15 a set.
Please let me know asap so we can have them on before the trak! Everyone will also get their club T-shirt that they ordered, and for those of you who haven't ordered, I will have extra! T's are $10 ea.
PLEASE PLEASE PLEASE LET ME KNOW BEFORE THE MEET IF YOU WANT DECALS. E-MAIL ME AT WORK AT redelmo@aol.com, my home address is down.
See you guys Sat W00T!
Yeah, I don't think I'm going to this meet.. Don't get me wrong going to the track is probably a lot of fun it's just not a good time.. Derrick if you go grab my shirt and I'll grab it from you when I see you next.. which should be when we do tranny fluid swaps.. (and yes I am taking the joke to the next level.) and maybe get those radiators if you were still getting them.. I can front you the money or pay you after you get them or go with you which ever.
well lets see what i got done today...
Oilchange: Check.
New plugs: Check.
Ebrake: Fixed... story in a moment.
Speaker short: delayed till sunday.
Drivers door handle: delayed till sunday.
ok, did a few things today, among them was seeing about a brake fluid leak from the "New/reman" caliper on the left rear. Upon closer inspection of caliper it seemed the lever that was activated by the Ebrake was incredibly loose...as in was not manufactured properly. I was able to "push" the lever back into position, thus also tightening up my ebrake considerably....still need to bleed it all again, but thats for another day.
Oilchange: Check.
New plugs: Check.
Ebrake: Fixed... story in a moment.
Speaker short: delayed till sunday.
Drivers door handle: delayed till sunday.
ok, did a few things today, among them was seeing about a brake fluid leak from the "New/reman" caliper on the left rear. Upon closer inspection of caliper it seemed the lever that was activated by the Ebrake was incredibly loose...as in was not manufactured properly. I was able to "push" the lever back into position, thus also tightening up my ebrake considerably....still need to bleed it all again, but thats for another day.
*Crosses fingers*
Ill be showing up, but not running, spectator onry tomorrow. Ill be clean I hope too...damn skeeters all over the bumper... i mean all over it >.>
Ill be showing up, but not running, spectator onry tomorrow. Ill be clean I hope too...damn skeeters all over the bumper... i mean all over it >.>
sorry guys wish i could have meet up, but i didnt get in until about 3 am, so i was out for awhile. pm me i would like to buy a shirt from you. Thanks and I hope everyone had a good time.






