Rtek Rtek 2.0 Official Update Thread :)
#102
Rotary Freak
iTrader: (4)
Shouldn't you be able to have him tune it with your 2.0, and then just use the same settings for the 2.1?? Timing shouldn't change any and it sounds like the fuel map may be a little different in the new version but you should be able to adjust for it. If you are running -3% at 3000k at vacuume on the freeway it would be the same for both yes. If you are running +16% @12psi at 5k rpm it should also stay the same. If im just retarded )not timing) let me know but i'd say you should be able to get really damn close to what it is set at IF the upgrade happens after your tuning session.
Then again.......
Then again.......
#103
Senior Member
Join Date: Nov 2001
Location: Las Vegas, NV
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
timing now is based on load, not on on psi vs rpm. I would basically pay $400 to have him tune my 2.0, then put the 2.1 in and 'guess' on the rest of the settings. not to mention the huge increase on fuel settings etc....
#108
Rotary Enthusiast
iTrader: (1)
https://www.rx7club.com/potential-advertisers-223/future-rtek-products-information-634195/
I know it doesn't have an ETA but if there was one, it would be listed there.
I highly doubt it will be next summer by the time we release it. More like late this year.
I know it doesn't have an ETA but if there was one, it would be listed there.
I highly doubt it will be next summer by the time we release it. More like late this year.
#109
Full Member
iTrader: (4)
Join Date: Aug 2006
Location: Phoenix, az
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Not to ruffle anyones feathers but... Late this year???? I was told when i calles it would be out in the next couple of months. I would really like to be able to tune my car at higher boost. Again not to **** anyone off but... If u released a product that needs modification to be as much as it is supposed to be y not do the update first. then worry about new products.
Sorry for the rant...
Sorry for the rant...
#112
Rotary Enthusiast
iTrader: (1)
Guys! My comment about later this year was directed at MyLastExtacy asking about the S5, NOT the S4.
icecreaman- I'm sorry that you feel we need to get this out before your dyno session. We are going to release it when we feel it's ready. We expect that to be within the next month or so. While we will do our best, we cant guarantee that it will be ready by the time your dyno session rolls around.
icecreaman- I'm sorry that you feel we need to get this out before your dyno session. We are going to release it when we feel it's ready. We expect that to be within the next month or so. While we will do our best, we cant guarantee that it will be ready by the time your dyno session rolls around.
#113
Senior Member
Join Date: Nov 2001
Location: Las Vegas, NV
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
im not saying it should be, im just trying to find out if it WILL be.
I would love to put out a sweet tune with my BNR stage 4 and the Rtek, im not going to be butthurt if its not done. however i just need to get something else if it wont be ready.
for the record, i love my stage 2 as it sits with my BNR stage1 at 12 psi. It was a real easy tune. but the stage 4 without the upgrades of the 2.1 i can't see spending the cash on the tune.
let me know either way asap if you guys feel it wont be out or not
Thanks
I would love to put out a sweet tune with my BNR stage 4 and the Rtek, im not going to be butthurt if its not done. however i just need to get something else if it wont be ready.
for the record, i love my stage 2 as it sits with my BNR stage1 at 12 psi. It was a real easy tune. but the stage 4 without the upgrades of the 2.1 i can't see spending the cash on the tune.
let me know either way asap if you guys feel it wont be out or not
Thanks
#114
Full Member
iTrader: (4)
Join Date: Aug 2006
Location: Phoenix, az
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Sry turbo2ltr...
Just anxious to get the fb up to 12 psi.
I can understand waiting for a final product for the release.
And as far as the tuning at stock boost a+ job! It is a very easy to use interface.
Just anxious to get the fb up to 12 psi.
I can understand waiting for a final product for the release.
And as far as the tuning at stock boost a+ job! It is a very easy to use interface.
#117
Rotary Slave
iTrader: (3)
Not to hijack the thread, but is the 2.0 able to run without afm yet? I read in another thread that on release it still needed it but would soon be able to do away with it. This happened yet? Also, anyone have any screen shots or self made timing maps to show? I havent seen one in here yet made in the same layout as the rtek tuning map
To me that looks like a foreign language. Nothing is labeled, which is my main problem. What is what. Sorry for the noobish questions. Trying to find out more about the 2.0 before I buy one
Also, will the 2.1 be a software update or a new chip? Am I better off waiting for the 2.1 as it says 2nd quarter of 07', which should be soon should it not. PSI vs RPM sounds much nicer to me than load vs rpm. thanks
To me that looks like a foreign language. Nothing is labeled, which is my main problem. What is what. Sorry for the noobish questions. Trying to find out more about the 2.0 before I buy one
Also, will the 2.1 be a software update or a new chip? Am I better off waiting for the 2.1 as it says 2nd quarter of 07', which should be soon should it not. PSI vs RPM sounds much nicer to me than load vs rpm. thanks
Last edited by FCKing1995; 04-16-07 at 01:53 AM.
#118
Rotary Enthusiast
iTrader: (1)
Theres only so much you can cram on the screen. the Load axis is labeled, RPM runs along the bottom and timing values are in the boxes.
I highly suggest you read the manual...I think it would help you understand.
It's linked on this page
http://www.pocketlogger.com/index.php?pid=rtek7
I highly suggest you read the manual...I think it would help you understand.
It's linked on this page
http://www.pocketlogger.com/index.php?pid=rtek7
#123
sideways!!
iTrader: (9)
screen is easy to read for me.
you can tune for more boost, u just gotta be careful, have a wideband and know what your doing and you'll be ok. i got a rough tune right now, it's just running alittle rich in some spots but thats as best as i can do especially when i know the new update is coming and ill have to retune it again.
you can tune for more boost, u just gotta be careful, have a wideband and know what your doing and you'll be ok. i got a rough tune right now, it's just running alittle rich in some spots but thats as best as i can do especially when i know the new update is coming and ill have to retune it again.