680RWHP12A

please use this area to post what you have purchased from rotaryshack, and how you like your product as well as customer support and how prompt we were in shipping your order

RotorJoe

I picked up a 62-1 P-Trim Garrett T04E Turbo from him close to about a year ago. I love the turbo comes on strong and I have had no problems with it what so ever. I just wish I could say the same about the car.

I also picked up a complete Webber DCOE 48 with upper and (modified for no emissions) lower manifolds for a 13b SE motor. Besides learning how to tune a carb everything is great.

Rob had great feedback, was always willing to help (trust me I called him more then a few times with questions) and he had fast service. I will use him again when needed.

Thanks Rob,
Joe

Siraniko

iTrader: (13)

Here's one.

https://www.rx7club.com/showthread.p...hlight=screwed

perfect_circle

i purchased a carb hat, and some jets and i was supposed to also get a manual that included a break down of the carb, but you must have forgot, i undertand that things get busy, and he did throw in a silicone elbow for free. so im satisfied, and i look forward to talking to you when i get my car running, and i attempt to tune it.

mazda6guy

iTrader: (1)

Hey I haven't purchased anything for my 12at project yet. I plan on it real soon but you was really helpful with answering all the tech questions that I was throwing at you. I give you a thumbs up from a future customer. Keep up the good work!

FB II

Mexico is the man! been dealing with him for years now and i have always stuck with rotary shack thru and thru. Great parts at mexican prices and you just can not beat the cheeeeeeeeeeeeeeeeeeese factor!!!!!!!

jimmyodunn

I had Robert work on my 88 n/a. Tune up, smog, lowering springs, new struts, engine bay clean, window switch fix, and many more general nuissance fixes. He gave me a great deal and did fabulous work. I recommend Rotaryshack highly.
JD

Dan_s_young

iTrader: (1)

Robert is a awesome guy, I have bought jets for my weber 45 and a carb rebuild kit from him. He is really helpful with jetting and had some good baseline jet suggestions for me to start out with! Will for sure be doing business with him again in the future!

680RWHP12A

here is a good one


https://www.rx7club.com/showthread.php?t=517543

The Wankler

iTrader: (14)

****, my fricken intake is just toooooo shiney Robert! The OER carb and polished manifold is plain awesome, thanks!

aussiesmg

iTrader: (1)

Robert sent me a ring and pinion set, on a, no like, no buy basis, haven't yet installed that diff but his patience after I messed up the delivery address was remarkable and he has been nothing but helpful and encouraging.

csmotorsports

i orders brake calipers pads rotor spindles lines oh lets not forget shipping
3 months ago i have made many phone calls robert will not return my calls
at this point i would love to have my money back
or better yet if someone would see that he gets this message to call craig swan
704-552-8885

680RWHP12A

i have sent you seveal e mails, im still waiting payment on the modified fron cover that you wanted.. i have sent you several e mails and have not gotten any response..

also i would like to add, how long did i hold this brake kit for you? how many technical questions and how much time have i already spent with you on the phone? i will gladly send your $300.00 back for a complete disk brake changeover kit (for a 1959 bugeye too)

i cannot afford to take your calls, im sorry.. i always answered your calls up until last time when you were stalking someone to repo thier car and kept me on the phone..
took pictures of any part that you asked too...

Kim's FB

Can't say enough good things about Sexy!
I bought a Webber 50mm sidedraught and got it in 2 days from Cali to Illinois.
Always advise me if I'm doing wrong and lets me know how it should be done the right way with out any watering down.

Did I mention Sexy prices?

Sorry that this guy had to screw up your positive thread. Kick him in the nuts.

Rotary Weasel

purchased a sunroof from Robert..shipping was fast..and possibly the best packaging I've seen yet for a mailed parcel..arrived safe and sound..thanks!

boriqua51371

i got all this from robert the pictures say it all. http://i39.photobucket.com/albums/e1...exdone_002.jpg

http://i39.photobucket.com/albums/e1...exdone_003.jpg

http://i39.photobucket.com/albums/e1...arparts047.jpg


i just have to say that this intake looks awsome cant wait to get it finished.

Hyper4mance2k

iTrader: (40)

I got a carb hat, and a boost gague. And to my surprize the hat was polished when it arived in 3 days too! Not only that, but hours of support through out this build has been priceless.

JeffRX7

Well lets see... my buying experience went as follows... I ordered a 3200$ package of a ported t2 motor complete with all accessories. I paid in full, and after a huge delay, got the accessories, but no motor! the part thats worth most of the price! after calling a few hundered times, getting false promises with no result, i submitted to the bbb, filed consumer complaints in both my state and cali, and unfortunately it looks like without dropping a few grand on a lawyer, i won't be seeing my money or my motor. I now run a jspec motor because i couldn't afford anything better after losing my azz to the shack. keep in mind, my motor was supposed to be built and shipped within a few months and it has now been YEARS... Robert, I know you'll read this, and I know you know what you need to do to take care or it. you know my number, if you lost it, PM me. The motor, the refund, get it done.

Jeff

680RWHP12A

ahh, nice post, thanks.. ok, where should i start
jeff bought a turbo 2 basket case car // motor was missing along with all the accessories so he made the purchase with the shack for a streetported motor with all accessories to get his car up and running... so far so good
he sent a deposit and i sent the accessories and got started on the motor.. when the motor was completed he did not send final payment for several months, ok fine.. i waited patiently..

i got the final payment , and shipped the motor. 2 months later i got the motor back and they said they wanted a full refund and they bought a j-spec motor from somewhere else.. i stated there was no refunds on custom built motors, why did you send the motor back? there reply was they never got the motor and i was trying to rip them off!?wtf?!(oh and no phone calls up until this point) i sent them pictures of thier motor (custom painted to thier specs, blue and silver) to show that it was done and what the motor looked like... jerry, his dad got the motor pics and said the motor looks nice but we dont need it anymore.. i explained that on a custom motor build i dont give refunds, sh he agreed to take the motor and he would get it picked up by his shiper.. well he had his shipper show up without any way to load the motor( no pallet jack or liftgate because that costs extra) and i dont have a forklift so there was no way to load the motor.. well ,he never sent another truck, and again decided he wanted all the money back...

i spoke with the BBB and they said i was in the right as well as the local agency in wisconsin, so these guys are pissed and want thier money back and will do anything to get it back..
i wonder how they got the j-spec motor running? the j-spec motors come with a cut wiring harness, i bet he used mine along with alot of the other parts i sent them!!

you got all the motor accessories before your final payment was made ..
accessory list;
complete turbo 2 intake upper manifold with throttle body and intake plenum
complete turbo 2 lower intake manifold with all accessories in tact
complete turbo 2 wiring harness in excellent condition
turbo 2 ecu
2 sets of turbo 2 injectors with fuel rails, and regulator, new fuel dampener in excellent condition
turbo 2 intercooler
factory turbo intake pipe in excellent condition
alternator with brackets and bolts
all msc solinoinds// actuators that go on top of the motor
smog pump
air flow meter
all bolts// nuts to install the above listed parts
and tons of pictures during dis-assembly to aid him in his installation process!!

you got a custom built motor done to your specs so once its built its your motor, even if you change your mind
i just got off the phone with his dad and new he wants the motor!? so... im sending it off again this week... im betting they will keep the motor this time, oh and i told them i will still give them a 1 year warranty from the time that they get the motor, what more can i do?

JeffRX7

I just finally read roberts orignal reply to this post and it made me laugh, full of the usual lies. first, he said i had a basket case of a car with no motor... i had a complete car that was missing a few parts off the UIM, and is now a beautiful 7... Second, he made it sound like i didn't have the money to pay... i had originally taken a loan for the full ammount and it was just sitting there. the reason i waited to send the second payment was because HE ASKED ME TO. he said he didn't want the rest of the money until i could see pictures of the motor that "he couldn't send because of computer problems...i waited months for pics, and eventually sent the remainder of the money out of good faith( my mistake). Thirdly, he said he sent the motor and got it back 2 months later.... from when he told me he sent it, i waited over 4 months while calling him weekly and getting either an excuse or empty promise. He later INFORMED ME that the motor had been returned to him because he had underweighted it for shipping. This is when he told me I was now responsible for shipping because he had already paid for it. I tried multiple times but there was always an excuse on his end. After it seemed there was no way i was getting this motor, THIS is when i asked for a refund. common business sense! you cant deliver, you give the customer their money back! After i made these posts online, he finally made contact again, and promised he could get the motor to me again... assuming he would like this whole mess off his plate i accepted his offer and now sit again waiting. Will it come? I'll keep everyone posted for future buying knowlage. And Robert, that's pretty immature of you to twist your story to make me sound like a dick to make yourself look better. All that shows is more lies.

csmotorsports

its june would like to complete order thanks cs

680RWHP12A

there goes your front engine cover, and im not holding the rear end anymore for you.. good luck with your project... you will have your spindles soon.. thanks for the great feedback

saltyslug

Robert from rotary shack is a great guy and even a better buisness man. he did the prep work on my carb and explained every aspect of my 12a turbo that I need help on and anything extra I might have needed. it took him a little longer on the shipping but that was because he was hunting down a set of stacks for nuthin.


I WOULD NOT TRUST MY ENGINE AND WALLET WITH ANYONE ELSE EXCEPT ROBERT.

I WILL USE HIM AGAIN FOR SURE. GOOD LUCK ROBERT

PS I am still huntin down some of that wisconsin cheese for ya. I never forget.

boost_kamikaze

Robert is a great guy...helped me a lot, hes exceeded all the expectations that I had for him...he offered me way more than I was buying, helped me every step of the way....

all of you that just talk crap on him and the shack....well you all suck...


thanks for everything robert

RoToReX7

everytime i'm in los toros, robert's there drinking a margarita. thats all i know.. oh yeah, he does awesome work! haha tan says wassup sucka.