Low Prices on Pro Diffusers
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
Low Prices on Pro Diffusers: $350 for fiberglass and $600 for carbon fiber
Right now we have a special on the Pro Diffuser.
Fiberglass: $350,
Carbon Fiber: $600
Shipping will be about $100 within the lower 48 States by freight.
Fiberglass: $350,
Carbon Fiber: $600
Shipping will be about $100 within the lower 48 States by freight.
Last edited by rotaryextreme; 03-17-06 at 02:54 AM.
#3
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
Same good price. Got a few back orders to fulfill. If you order now, you are looking at about 2 weeks.
Chuck
Chuck
Originally Posted by 73828793
do you have any carbon fiber diffusers left?
#5
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
I am pretty sure you have to trim the diffuser to clear the tip.
Chuck
Chuck
Originally Posted by TRISPEEDFD3S
Hey Chuck, i've got the A`PEX-i PS Revolution, will it clear this diffuser, or would we have to cut? It's just like a GT-SPEC.
#7
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
You need to trim the diffuser to clear the tip.
Pretty much for any round canister type, you need to trim the diffuser to clear the tip. 80% of the people need to do this because the round canister type is the most popular exhaust.
It's very easy to do. You can use a Dremel to do it in 5 min and just use some 100 grit sand paper to smooth it if you are not the greatest trimmer in the world.
Chuck
Pretty much for any round canister type, you need to trim the diffuser to clear the tip. 80% of the people need to do this because the round canister type is the most popular exhaust.
It's very easy to do. You can use a Dremel to do it in 5 min and just use some 100 grit sand paper to smooth it if you are not the greatest trimmer in the world.
Chuck
Originally Posted by Chaosx1
Would the GReddy Titanium exhaust clear it?
Trending Topics
#9
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
You just trim a notch to clear the tip or the canister like the pic below.
Chuck
Chuck
Originally Posted by TRISPEEDFD3S
We'd have to cut and trim carbon fiber? How would it look then?
#12
Senior Member
Join Date: Jul 2004
Location: lemoore ca
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
do we paypal or throught you site...so sweet..hope i can make it im on cruise right now chuck but hopefully 15 apr will be my lucky day...awsome deal on the prices. thanx man you rock
#13
Senior Member
Join Date: Jul 2004
Location: lemoore ca
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
do we paypal or throught you site...so sweet..hope i can make it im on cruise right now chuck but hopefully 15 apr will be my lucky day...awsome deal on the prices. thanx man you rock.
#14
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
Just use our online shopping cart and you can pay with paypal.
Chuck
Chuck
Originally Posted by riptor
do we paypal or throught you site...so sweet..hope i can make it im on cruise right now chuck but hopefully 15 apr will be my lucky day...awsome deal on the prices. thanx man you rock
#18
Eats, Sleeps, Dreams Rotary
Thread Starter
iTrader: (2)
I don't have any copy ones. I can only import you the original one from RE Amemiya. They are $660 for all 4 pieces in carbon fiber, 2 pieces at the center and 2 pieces on the sides.
Chuck
Chuck
Originally Posted by 73828793
just got my diffuser in the other day and it looks great, thanx chuck... also do you sell the bow tech generators for the diffuser pro?