So, I'm thinking about Spraying the House Down. **Questions**
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
So, I'm thinking about Spraying the House Down. **Questions**
So, should I start out with a 50-75 shot or should I spray the world at it ?
What gears should I spray through (1-4)?
Should I hook it up through a button or a throttle switch?
What's the best placement for the nozzle/nozzles ?
What gears should I spray through (1-4)?
Should I hook it up through a button or a throttle switch?
What's the best placement for the nozzle/nozzles ?
Last edited by LUPE; 10-26-06 at 05:50 PM.
#3
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by red87tll
Have you been able to make this thing stick while off the spray yet?
#6
Banned. I got OWNED!!!
Thread Starter
Join Date: Apr 2005
Location: Belleville, IL
Posts: 5,506
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LETHAL RX7
turn it up.... let er eat
#7
Senior Member
iTrader: (1)
Join Date: Oct 2001
Location: pa
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
why dont you get your setup fully maxed out before you spray it?? Unless you already have been out with the car that i didnt see.. your car is gonna fly just on boost alone so why throw another thing in the mix before you have even made a ***** out run with what you have?
Greg
Greg
Trending Topics
#8
Banned. I got OWNED!!!
Originally Posted by LETHAL RX7
why dont you get your setup fully maxed out before you spray it?? Unless you already have been out with the car that i didnt see.. your car is gonna fly just on boost alone so why throw another thing in the mix before you have even made a ***** out run with what you have?
Greg
Greg
i second that..
if your car made 600+ twhp, then its got more in it...
the P.R.'s are at the track every day, more track time is what you need
#9
Rotary Enthusiast
iTrader: (3)
Join Date: Apr 2001
Location: las vegas, NV
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LETHAL RX7
why dont you get your setup fully maxed out before you spray it?? Unless you already have been out with the car that i didnt see.. your car is gonna fly just on boost alone so why throw another thing in the mix before you have even made a ***** out run with what you have?
Greg
Greg
#13
Will work for horsepower
Eric i have been slow to say anything becouse there is better people on here to comment on this subject but a friend that races NHRA rx7 warned me that the porting is important with no2. Overlap can cause problems. Might be worth getting opinion on your porting!
#14
Senior Member
Join Date: Apr 2002
Location: West Palm Beach, FL
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
Ya don't need no spray! With your HP to weight ratio, you should be in the low 9's! You need to get your suspension dialed in first. Japtrix went 9.40's weighing in at 2600 and change w/driver, with the same HP you have. Oh btw, and that was using the IRS cutting consistent 1.3 60ft! You haven't learned the car yet and ya wanna spray it? You need to get someone who knows suspensions to go with you to the track, and help you dial it in. Once you got that done and your're going low 9's, then you spray it!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM