Rotary Drag Racing The place to post your racing stories and info

S366 Timeslips

Thread Tools
 
Search this Thread
 
Old Sep 10, 2012 | 05:16 PM
  #1  
WLD 07's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
Liked
 
Joined: Oct 2004
Posts: 107
Likes: 3
From: Australia
S366 Timeslips

Hey guys

Looking at a new turbo for my street / strip 13b 1st gen. I've been looking at the S475 but just wanting to see what times the S366 is capable of before I decide.

I'll be shooting for ~22 - 25psi on pump gas with WI and wanting to run high 9's ~ 140mph.
Reply
Old Sep 10, 2012 | 07:39 PM
  #2  
flaco's Avatar
******
Tenured Member 15 Years
iTrader: (7)
 
Joined: May 2009
Posts: 901
Likes: 0
From: miami
i say it depends the weight of the car and a bunch of other things . thats just my opinion
Reply
Old Sep 10, 2012 | 08:36 PM
  #3  
jm93rx7's Avatar
Committee Member #3
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Sep 2003
Posts: 3,156
Likes: 1
From: S. Florida
not my car but he is on the forum


Reply
Old Sep 10, 2012 | 09:15 PM
  #4  
Bacon's Avatar
IRS 4 Life
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
Wilmeranic, my tuner has gone 9.21 @ 151 on the 366, with like 20-22 psi, but on meth
Reply
Old Sep 13, 2012 | 06:46 AM
  #5  
WLD 07's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
Liked
 
Joined: Oct 2004
Posts: 107
Likes: 3
From: Australia
I would expect fd's with 500 - 550 whp to be trapping at 130 - 135mph
Am I missing something

151mph from a 66mm turbo is hauling. If only meth was street legal.
Reply
Old Sep 14, 2012 | 11:21 PM
  #6  
1sgen's Avatar
583 rwhp 1st gen
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jul 2004
Posts: 397
Likes: 0
From: texas
ran 10.8 129 mph at 18 psi on pump gas and s475 t4
Reply
Old Sep 14, 2012 | 11:28 PM
  #7  
silverfdturbo6port's Avatar
500+hp club
Tenured Member 15 Years
iTrader: (26)
 
Joined: Sep 2007
Posts: 2,211
Likes: 4
From: .
Originally Posted by Bacon
Wilmeranic, my tuner has gone 9.21 @ 151 on the 366, with like 20-22 psi, but on meth
must be a ton of meth to make 650-700hp on 20-22psi to trap like that?
Reply
Old Sep 15, 2012 | 07:16 AM
  #8  
Liborek's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Nov 2008
Posts: 357
Likes: 0
From: Czech republic
Originally Posted by Bacon
Wilmeranic, my tuner has gone 9.21 @ 151 on the 366, with like 20-22 psi, but on meth
Could you share race weight just for reference to overall performance?

To the OP, S366 should have enough air to produce over 600, even 700 HP in well sorted setup with race fuel or alcohol.

Depending on your weight and bunch of other variables, you should be able to run in 140's, but boost level will be probably higher - so far, S366 was recognized as rather laggier turbo...
Reply
Old Sep 16, 2012 | 08:58 AM
  #9  
BlueMx5's Avatar
Full Member
Tenured Member: 15 Years
iTrader: (4)
 
Joined: Feb 2007
Posts: 193
Likes: 1
From: South NJ
Video was uploaded from my phone so thats why its sideways.
19lb pull ill let Willmer put his own numbers up
Yes the exhaust flow almost nocked me over **** was like standing in a heated wind tunnel that burns your eyes .. didn't really help i was standing in front of a couple of bricks
Reply
Old Sep 22, 2012 | 07:27 AM
  #10  
Bacon's Avatar
IRS 4 Life
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
SO last night wilmer went into the 9.1's hanging the hoops and trapped 150 on the first pass and 145 on the second
2475LBS wet with driver gf5r box

boost controller set for 22 psi seeing lil spikes to 23
Reply
Old Nov 3, 2012 | 05:22 PM
  #11  
WLD 07's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
Liked
 
Joined: Oct 2004
Posts: 107
Likes: 3
From: Australia
Any other S366 timeslips?
Reply
Old Nov 3, 2012 | 10:07 PM
  #12  
13BT_Starlet's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Nov 2007
Posts: 382
Likes: 0
From: EastCoast , Florida
Originally Posted by Bacon
Wilmeranic, my tuner has gone 9.21 @ 151 on the 366, with like 20-22 psi, but on meth
what exhaust housing and turbine wheel he is running? I've seen pics of the car and looks really nice being that its own by a mec engineer speaks for its self. what ecu and boost control he's using?
Reply
Old Nov 4, 2012 | 06:17 PM
  #13  
Bacon's Avatar
IRS 4 Life
Tenured Member: 20 Years
iTrader: (12)
 
Joined: Feb 2001
Posts: 2,634
Likes: 2
From: Sicklerville, South Jersey!!
Originally Posted by 13BT_Starlet
what exhaust housing and turbine wheel he is running? I've seen pics of the car and looks really nice being that its own by a mec engineer speaks for its self. what ecu and boost control he's using?

not sure on the housing sizes, know its a t4, microtech lt10s, PCS dash with boost controll
Reply
Old Nov 5, 2012 | 10:44 AM
  #14  
13BT_Starlet's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Nov 2007
Posts: 382
Likes: 0
From: EastCoast , Florida
Being that its a t4 its possibly that could be a 1.10 no larger than a 1.25.
Reply
Old Nov 8, 2012 | 09:36 PM
  #15  
WLD 07's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
Liked
 
Joined: Oct 2004
Posts: 107
Likes: 3
From: Australia
Still can't work out why 500-550whp S366 FD's aren't running 135-140mph.

Here is smg944's old T3 1.06 GT35r rx7 which probably made about 480 - 500whp yet trapped 132mph


Reply
Old Nov 8, 2012 | 11:22 PM
  #16  
WLD 07's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
Liked
 
Joined: Oct 2004
Posts: 107
Likes: 3
From: Australia
Also his new setup does 525whp and runs 140mph -

Originally Posted by smg944
i made 525whp at 27psi on a 67mm turbo. car does trap 140mph though.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM




All times are GMT -5. The time now is 11:53 AM.