Remote water pump
#1
Remote water pump
Anyone here running one of these?
I just got my Pro Comp remote water pump. Identical to the one in the link below. They are normally meant to be mounted directly on to the front of popular V8s. But mine does not have the legs it usually has to mount on to a V8. I plan on welding on some AN fittings and mounting it somewhere on the frame rails next to my radiator.
https://www.racingjunk.com/category/...SuperSize=true
But I need a flange with fittings on it like the ones from Rotary-Works (like in the link below) but for a 12a and with AN style fittings/threads. Anyone know where to get one. I have seen them before, but not in a while.
http://www.rotary-works.com/mm5/merc...gory_Code=RADI
I just got my Pro Comp remote water pump. Identical to the one in the link below. They are normally meant to be mounted directly on to the front of popular V8s. But mine does not have the legs it usually has to mount on to a V8. I plan on welding on some AN fittings and mounting it somewhere on the frame rails next to my radiator.
https://www.racingjunk.com/category/...SuperSize=true
But I need a flange with fittings on it like the ones from Rotary-Works (like in the link below) but for a 12a and with AN style fittings/threads. Anyone know where to get one. I have seen them before, but not in a while.
http://www.rotary-works.com/mm5/merc...gory_Code=RADI
#2
Found one...
http://www.pro-jay.com/1992-DOWN-WAT...0.qscstrfrnt03
Anyone know any others? Maybe with AN style fittings already machined in?
http://www.pro-jay.com/1992-DOWN-WAT...0.qscstrfrnt03
Anyone know any others? Maybe with AN style fittings already machined in?
#3
B O R I C U A
iTrader: (14)
Found one...
http://www.pro-jay.com/1992-DOWN-WAT...0.qscstrfrnt03
Anyone know any others? Maybe with AN style fittings already machined in?
http://www.pro-jay.com/1992-DOWN-WAT...0.qscstrfrnt03
Anyone know any others? Maybe with AN style fittings already machined in?
Meziere also makes one:
http://www.summitracing.com/parts/MEZ-WP91/
#7
B O R I C U A
iTrader: (14)
I think thiers is like the Maziere one.
WOW, those are nice! Do they have provisions for the water sensors?
I have a few of these in stock. complete with mounting hardware, AN fittings, O rings and gasket.
e mail me for pricing
Roan
rxpartsonline@gmail.com
e mail me for pricing
Roan
rxpartsonline@gmail.com
WOW, those are nice! Do they have provisions for the water sensors?
Trending Topics
#8
B O R I C U A
iTrader: (14)
Found one...
http://www.pro-jay.com/1992-DOWN-WAT...0.qscstrfrnt03
Anyone know any others? Maybe with AN style fittings already machined in?
http://www.pro-jay.com/1992-DOWN-WAT...0.qscstrfrnt03
Anyone know any others? Maybe with AN style fittings already machined in?
#9
After some searching, I realize the Pro Comp pump is probly the best choice. Although it will work. I think I will switch to another remote water pump.
Any suggestions? I was told this is a very good affordable pump. But is 20gph enough? At around $150 new, this seems like a good buy. Its lighter and easier to mount than the pro Comp I have. And looks to be more reliable in the long run.
https://zekesengineering.com/pumps.html
Any suggestions? I was told this is a very good affordable pump. But is 20gph enough? At around $150 new, this seems like a good buy. Its lighter and easier to mount than the pro Comp I have. And looks to be more reliable in the long run.
https://zekesengineering.com/pumps.html
#10
B O R I C U A
iTrader: (14)
After some searching, I realize the Pro Comp pump is probly the best choice. Although it will work. I think I will switch to another remote water pump.
Any suggestions? I was told this is a very good affordable pump. But is 20gph enough? At around $150 new, this seems like a good buy. Its lighter and easier to mount than the pro Comp I have. And looks to be more reliable in the long run.
https://zekesengineering.com/pumps.html
Any suggestions? I was told this is a very good affordable pump. But is 20gph enough? At around $150 new, this seems like a good buy. Its lighter and easier to mount than the pro Comp I have. And looks to be more reliable in the long run.
https://zekesengineering.com/pumps.html
http://www.hrpworld.com/index.cfm?fo...ction=category
#11
My machinist has finished the design of the water housing. They will now be going off to get anodized and should be ready shortly. They will have provisions for coolant temp/water temp sensors..
#16
On flats
iTrader: (29)
Join Date: Oct 2004
Location: Albuquerque
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
I have a few of these in stock. complete with mounting hardware, AN fittings, O rings and gasket.
e mail me for pricing
Roan
rxpartsonline@gmail.com
e mail me for pricing
Roan
rxpartsonline@gmail.com
#24
Many different choices. Tap the parts, tap the radiator, sensor in the side of the motor, inline sensor on the hose. Not sure yet. I'll choose when everything else is installed.
E-mailed him directly... He responds quickly. Yes, we as humans are lazy and want easy click here buy now options. Maybe this will open his eyes to upgrade the site?
lol... I think you hit the nail on the head. There are a few other things I'm looking for that's listed on the site. But with no pics, or links to pay, or to get more info on the product. I'm sure Roan loses sales all the time. Meaning less money for the car...
You heard it, upgrading your site, makes your car faster!
E-mailed him directly... He responds quickly. Yes, we as humans are lazy and want easy click here buy now options. Maybe this will open his eyes to upgrade the site?
You heard it, upgrading your site, makes your car faster!