First time going back to the track after a long time. A lot has changed. Installed a cobra rear, driveshaft shop axles and a Gforce tranny. Thanks to SpeedNYC and the guys at Speedtek that helped me get the car ready for this event. Good news is this is the first time I have not broken anything. Bad news is that the car is spinning a lot more. I went out with ET Streets, next time out will be with full slicks.

I had three passes, unfortunately I had to lift each time. The one pass that I stayed in it longer than the other 2 had a better 1/8 mile time than the rest.

60ft 1.521
330 4.063
1/8 6.445
MPH 92.72
1000 9.018
1/4 11.568
MPH 84.03

Here are the three passes on video.

http://www.youtube.com/watch?v=_1WEexGZn3A

Thanks again SpeedNYC and Joe Perez that helped me get the tranny. Thank you Dee, Judge Ito and Ray that took the time to advise me on the next steps. Thanks Enzo for a great turbo kit and the advice on the turbo. And thanks to Speedtek that helped me put all these parts together and all the fab work!

Any advice is appreciated.

Thanks,

Anthony

 

From the looks of that 1/8mi run, that thing is moving! We can run 1/8mi...you will destroy me after that lol.

 

looks twitchy in the video. i'm glad you didnt crash

 

damn that thing is moving in the 8th. was the track not prepped properly, you were spinning your *** off! car sounds really strong.

 

Looks like fun skatin everywere!

 

Looking good Anthony! Little more seat time and you will have it figured out. That's got to be the craziest time slip I have ever looked at! Is ok not to give props to me makin sure you got your clutch in time..


Who's that big headed guy at the 1:26 mark?

 

Fire your camera man.

 

Thanks guys and thanks Mike!! Track was prepped properly, I should have been on full slicks vs the Et streets. I have to grind the calipers to mount the slicks so I was really just being lazy.

 

Gonna be sick fast when its dialed in!

 

Congrats on the new setup, the car/engine sounds AMAZING!

 

That thing is going to flat fly when you get it to stick. Congrats! Now get to work!

 

that looks to be too much fun , good stuff mate

 

I was sweating bullets when that thing got close to the wall. Once that is sorted, that is going to be a real monster. Congrats.

 

Great run Anthony ..

 

you were supposed to be doing this like 6 months ago

is this what happens when I dont stay on top of things?

 

Thanks guys....Ran the car again at Maryland Import VS Domestics and broke 3rd gear in the tranny but no more spinning now.


Hahahaha, you are too funny Rob and yes, this is what happens when the team leader slacks off lol

 

Sorry to hear that Anthony

What s the plan now, a used FD tranny?

 

I thought you retired also?


Been like crickets on here!

 

Yeah I know, not retired just yet.

I wish, the tranny in the car was a Gforce.

 

Looks like a handful to drive! Can't wait to see a proper pass.

 

damn you broke the gforce? those things are rated to hold a lot of torque.

what turbo are u using and any dyno sheet?