The quest for 9's all motor
#127
Junior Member
I don't know what cfm's it puts out. It's just a Weber 51IDA. I'm not too familiar with Holleys. I would guestimate my carb is pretty close to a Holley 600-650. I have heard that Webers tend to make more power on PPorts because of the natural two runners for each carb butterfly and vise versa on a 4 port, but I can't varify as I have only run Webers. Webers are so much easier to tune and change around. YOu can't change chokes in a Holley like you can a Weber and changing jets is 10x easier.
#128
i say my car is junk because i use alot of use parts. but i think this year i will do real good with the junk i have my son tested car at only 8500 rpm to break motor in i think it will run good. i think this year will be fun because alot of people are going to be in all motor. this year i plan to make all the races
#129
Rotary Enthusiast
i say my car is junk because i use alot of use parts. but i think this year i will do real good with the junk i have my son tested car at only 8500 rpm to break motor in i think it will run good. i think this year will be fun because alot of people are going to be in all motor. this year i plan to make all the races
they told me you were at the track racing your rx7..........they filmed you talking to others and they got film of you talking.....
Also listen to the video,sounds like a driver who knows how to Rev a a motor like a pro ,how did your son learn so quick to shift trannies and drive like that?
I am busting a CSI on you LOL......just admit it was you....it just testing.
Eric your car is way better than any out there.......your lighter than mine..i weigh 2100 lbs and i been racing with that weight for a while..i might have something for april.....might not test but we will see.
#130
hey rene you know my car weighs just as much as your car you know i have a mild steel cage i beleive my car is 2000 pounds lets all have fun race mazdas we need to all have fun and beat the hondas
#131
i say my car is junk because i use alot of use parts. but i think this year i will do real good with the junk i have my son tested car at only 8500 rpm to break motor in i think it will run good. i think this year will be fun because alot of people are going to be in all motor. this year i plan to make all the races
I don't think anyone is using brand new parts Eric. Even my 13b will have used parts. No excuses, lets go out and race and have fun. YOu have a very nice car. See you at the track.
#132
Junior Member
I guess my car is junk too because I am using used irons, e shaft, rotors, and housings that mave more than 3mm of chrome flaking.
I don't think anyone is using brand new parts Eric. Even my 13b will have used parts. No excuses, lets go out and race and have fun. YOu have a very nice car. See you at the track.
I don't think anyone is using brand new parts Eric. Even my 13b will have used parts. No excuses, lets go out and race and have fun. YOu have a very nice car. See you at the track.
sorry spoil the party but i have brand new 12a housing lol but fortunately i found a guy that has a few and got them cheap (very cheap) heheh but thats all thats new every thing else in the engine is used , i even have a 6 port 12a but the irons are pitted around the water jacket and i am not getting my hands on any good irons , hopefully i can find a set
#134
hey lets race and have fun this going to be my last year anyway going to let son takeover i am getting into something else
Last edited by drag 7; 03-31-11 at 07:23 PM.
#135
sorry spoil the party but i have brand new 12a housing lol but fortunately i found a guy that has a few and got them cheap (very cheap) heheh but thats all thats new every thing else in the engine is used , i even have a 6 port 12a but the irons are pitted around the water jacket and i am not getting my hands on any good irons , hopefully i can find a set
Who the heck is mexico 2?
#137
Rotary Enthusiast
well its all good here everyone is getting pumped up......enough of the trash talking but i do wanna see some rotaries race on April 23.
I am gonna put my engine together with whatever i can salvage from my last blow up and go for a good run.I wanna see if i can improve my time and MPH so i will go hard or may brake something trying.....but we will see.......so everyone get ready!
I am gonna put my engine together with whatever i can salvage from my last blow up and go for a good run.I wanna see if i can improve my time and MPH so i will go hard or may brake something trying.....but we will see.......so everyone get ready!
#138
pushing s##t up hill
sorry spoil the party but i have brand new 12a housing lol but fortunately i found a guy that has a few and got them cheap (very cheap) heheh but thats all thats new every thing else in the engine is used , i even have a 6 port 12a but the irons are pitted around the water jacket and i am not getting my hands on any good irons , hopefully i can find a set
i wouldnt waste my time with 12a housings for performance stuff, just mill down 13b housings for instant bigger exhaust ports , 12a stuff will be worth money for resto stocker guys though
#140
pushing s##t up hill
id love to slap a 12a combo together , and that would be a given to start with , cheap new 13bt housings milled down to suit , i cant see what would stop anyone from using the side plates too , everything is bigger from stock, it would be the 12a cosmo block we never had
also you can have the water seal milled into the housing or not, depends on your side plates
also you can have the water seal milled into the housing or not, depends on your side plates
#143
Senior Member
I guess my car is junk too because I am using used irons, e shaft, rotors, and housings that mave more than 3mm of chrome flaking.
I don't think anyone is using brand new parts Eric. Even my 13b will have used parts. No excuses, lets go out and race and have fun. YOu have a very nice car. See you at the track.
I don't think anyone is using brand new parts Eric. Even my 13b will have used parts. No excuses, lets go out and race and have fun. YOu have a very nice car. See you at the track.
Wow !! I guess my car is a chimichanga .....I want to go to this event, I'm on my last straw but I made some progress today but I need a few more parts, if you want to donate to this cause please contact me......
maybe see ya all at the track to break santos a little some some, tell him I have the tune up to
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
#144
Wow !! I guess my car is a chimichanga .....I want to go to this event, I'm on my last straw but I made some progress today but I need a few more parts, if you want to donate to this cause please contact me......
maybe see ya all at the track to break santos a little some some, tell him I have the tune up to
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
maybe see ya all at the track to break santos a little some some, tell him I have the tune up to
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us