rotorracing

i went to the track this weekend and only did 3 runs the last one i did was a 12.8 @ 120mph with a 2.3 60ft with 10psi, just wanted to know some other mphs.
thanx

Destroy

What mod do you have done, thats a repectabe trap speed. You should be able to pull off a high 11 with slicks or drag radials.

Resource

12.20@119 w/10psi

tnt

10.71 @ 134.46 at 25psi.... SR20DET powered FD!!!!

Shaun

87GTR

iTrader: (61)

11.6 @ 115 @ 12psi

going to be turning up the boost to 26 - 28 pounds in 2 weeks after some dyno tunning. looking to hit some low 10's then

ErnieT

iTrader: (2)

SIG....

kabooski

Did you come down to orlando
for the battle of the imports?

there was a silver FD there with a Nissan motor
low 13's best that POS did with FMIC slicks or drag radials forget which , big turbo etc

maybe you did better at some other track
but When I saw it in Orlando
It was an embarrassing show for all the HUGE!!!!!!!!!!!!!!!!!!!!!!!!!!
amount of money dumped into the car just to run low 13's at that event

crispeed

Yes it's the same car Kabooski!
I've seen the car run low 11's before!

crispeed

Now back to the main topic!
10.24@135mph at 24 psi
9.67@140mph at 27 psi
9.51@144mph at 30 psi.
9.204@150.47mph at 30 psi + nos!

Resource

When's your bucket gonna be up and running again?

SPOautos

60 foot sucked due to babying the stock diff and axles but I traped 125mph with 18psi of boost and pump gas.

LUPE

444whp
10.74 @ 129 (Lifting and **** driving...

cripsR6

11.7@128 with 439rwhp and some sweet street tires.

12at

10.21 @137mph.
25 psi and race gas.

Rotarded

11.83 @ 117 16psi (stock twins), ET Streets, 1.77 60ft

pvz018

I Ran 9.28@153mph On 14psi On A 28/9 Inch Slick(20b)
Makes 810hp At Wheels On 24psi

LUPE

ismaelruiz

10.82@127mph@21psi on slicks on first pass. Could not run anymore because did not have roll cage and five point harness.

KaoticFdR1

13.9 10psi stock twins SMIC, DP, CB

Only had the car for a month first FR car when i took it to the track.

SilvioRX7

12.40 @ 120mph @ 14psi with a 2.1 60ft

PDViper77

iTrader: (9)

13.3 @ 109.xx with 8.5 PSI and slipping stock clutch

Hopefully I can get some new numbers this July.

adictd2b00st

12.9@110 on 11psi stock twins .....that was a year and a half ago (yea my car has been down that long )

1reven7

iTrader: (1)

11.73 @ 116 mph 15lbs dam clutch slipping after i had the car dyno tuned 394 rwhp

Goopy

Thess are two cars that we have been working with for some time now.
Fabian the first car a 1988 Turbo II 1/2 chassis that weighs a crazy 2700lbs has run 8.14 @ 169MPH and 8.08. Its all metal with most of his accessories still installed. Car runs between 35-37lbs of boost. Dynoed at "937HP" on Sporty Dynojet in PR. .
No intercooler and no crank trigger..Old school distributor..

FABIAN....
http://68.178.140.70/videos/06-03-15-004.wmv
http://68.178.140.70/videos/06-04-19-006.wmv
http://68.178.140.70/videos/06-05-17-003.wmv
http://68.178.140.70/videos/06-07-05-009.wmv
http://68.178.140.70/videos/06-07-12-008.wmv
http://68.178.140.70/videos/06-08-09-022.wmv

This car Fabiola is perhaps the most powerfull 13B in the world..
More than 1000HP ..boost & turbo are kept under wraps.
He has had 7 second runs but can do much better.
It ran 4.94 in the 1/8th mile at 154MPH in Lakeland FL..So go ahead do the math???.
Traction has become an issue thus hindering low 7 or even a high 6 second pass...
But its coming!!!

New Fabiola http://68.178.140.70/videos/06-09-24-043.wmv

www.GoopyApexSeals.Com
Coming Real soon!!!

God Bless the rotary community.

AnthonyNYC

iTrader: (3)

Sig...