i went 10.26 at 137mph
#55
Full Member
Thread Starter
Join Date: Feb 2005
Location: florida
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
sorry they havent posted the 10.07 vid yet
well all weekend the car was running low 10s
i think i just need a bit more power
gaby skern wil be tunning the car before the end of this month
well all weekend the car was running low 10s
i think i just need a bit more power
gaby skern wil be tunning the car before the end of this month
#56
pushing s##t up hill
great times you are doing there, and for the guys who want to know of the seals,(not this car as obviously i dont know) the half the price ones we sell in Australia are scr seals (south coast rotaries) , i personally have pts but it dont faze me what yous use or not
Good to see you are nearly in the nines mate
Good to see you are nearly in the nines mate
#59
Full Member
Thread Starter
Join Date: Feb 2005
Location: florida
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
here is the 10.07 vid
http://youtube.com/watch?v=KBlS633h0Do
next there going to be some more races so be pending
doing some changes to the car
wellding the 2 front bars for a 6 point
I upgraded the brakes
front with power stop drilled rotors and hawk pads
rear stock brakes
and stainless steel braided lines for the brakes
installed line lock
guts any body have pics with a drive shaft loop installed???????
let me know
http://youtube.com/watch?v=KBlS633h0Do
next there going to be some more races so be pending
doing some changes to the car
wellding the 2 front bars for a 6 point
I upgraded the brakes
front with power stop drilled rotors and hawk pads
rear stock brakes
and stainless steel braided lines for the brakes
installed line lock
guts any body have pics with a drive shaft loop installed???????
let me know
#63
Senior Member
iTrader: (1)
If set up correctly, he can leave in boost- pull a 1.5-1.4 60 foot, and be in boost the entire pass!
And you have to remember the Tqu of the 2JZ will be a much more, and a mile wider than the 13b-so it doe snot mind the weight as much,
#64
Chasing numbers
iTrader: (5)
and a good 60 foot, I completely believe it.
If set up correctly, he can leave in boost- pull a 1.5-1.4 60 foot, and be in boost the entire pass!
And you have to remember the Tqu of the 2JZ will be a much more, and a mile wider than the 13b-so it doe snot mind the weight as much,
If set up correctly, he can leave in boost- pull a 1.5-1.4 60 foot, and be in boost the entire pass!
And you have to remember the Tqu of the 2JZ will be a much more, and a mile wider than the 13b-so it doe snot mind the weight as much,
Yeah, its a cutting 1.5 60's and he runs a th400 with decent size stall....
#65
*** Bless The USA
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
sk8world
You need to get that auto, bro. Mustangs are doing it all day long with C4's.
Jump on youtube, search for "20B RX4". He's running a C4 as well and ran a bunch of 8.80 passes and it's a streetcar. He's got a bunch videos of him leaving off the foot brake and also leaving off the transbrake.
You need to get that auto, bro. Mustangs are doing it all day long with C4's.
Jump on youtube, search for "20B RX4". He's running a C4 as well and ran a bunch of 8.80 passes and it's a streetcar. He's got a bunch videos of him leaving off the foot brake and also leaving off the transbrake.
#66
Chasing numbers
iTrader: (5)
sk8world
You need to get that auto, bro. Mustangs are doing it all day long with C4's.
Jump on youtube, search for "20B RX4". He's running a C4 as well and ran a bunch of 8.80 passes and it's a streetcar. He's got a bunch videos of him leaving off the foot brake and also leaving off the transbrake.
You need to get that auto, bro. Mustangs are doing it all day long with C4's.
Jump on youtube, search for "20B RX4". He's running a C4 as well and ran a bunch of 8.80 passes and it's a streetcar. He's got a bunch videos of him leaving off the foot brake and also leaving off the transbrake.
Yeah, I here ya... I would do it asap if i new the proper set up to go after. I have read of a few guys having issues getting out of the hole with the wrong stall. I just know jack **** about them... Send me lots of info. I really would like to go this way but only on a proven setup....
#67
*** Bless The USA
iTrader: (8)
Join Date: Jan 2007
Location: Saint Louis / Illinois
Posts: 7,139
Received 0 Likes
on
0 Posts
Yeah, I here ya... I would do it asap if i new the proper set up to go after. I have read of a few guys having issues getting out of the hole with the wrong stall. I just know jack **** about them... Send me lots of info. I really would like to go this way but only on a proven setup....
You can peice together your setup or buy it as a kit, the guy in this thread bought a proven kit. https://www.rx7club.com/rotary-drag-racing-167/c4-auto-13b-rew-quick-question-747178/
Thread
Thread Starter
Forum
Replies
Last Post
Bret Kepner
Midwest RX-7 Forum
1
09-12-07 12:06 PM
Bret Kepner
Midwest RX-7 Forum
1
04-18-07 10:38 AM