Broke the trannie
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Broke the trannie
Finally joined the broken trannie club shifting into 3rd on the street, and it caused it to rattle like the twin disc but louder!
Then did a pull and went into 2nd gear and it took some of the gears off, i was able to make it 3 miles to the house before it started locking up.
3 years isint bad i guess if you track the car and cut 1.52 60 ft. But i need another J-Spec trannie.
I guess the 2 extra pounds of boost and the shifter extender didnt help!
Then did a pull and went into 2nd gear and it took some of the gears off, i was able to make it 3 miles to the house before it started locking up.
3 years isint bad i guess if you track the car and cut 1.52 60 ft. But i need another J-Spec trannie.
I guess the 2 extra pounds of boost and the shifter extender didnt help!
glad to here you were beating on it! There is a doug nash w/ vertigate on racingjunk.com He offered it to me for $1200. Been looking to pick one up for the RX3 but also thought that would be nice to have built like Allens and set it in the FD. I am sure some sheet metal work would be needed.
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
glad to here you were beating on it! There is a doug nash w/ vertigate on racingjunk.com He offered it to me for $1200. Been looking to pick one up for the RX3 but also thought that would be nice to have built like Allens and set it in the FD. I am sure some sheet metal work would be needed.
Ill problly just get another j-spec.
Im just happy it didnt happen last night when i was doing a hwy pull from 30-145 and lock up that might have tested the ticker a little bit!

Video to follow.
Joined: Aug 2002
Posts: 4,152
Likes: 0
From: Pittsburg, KS.
Hey busted7 I know a person in KC that have a good use tranny forsale if you want an unknown condition tranny I got 5 of them in my garage. Let me know if you want it?
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
I started the damage running an 08 vette to the dissapontment of his wife as i blew past him and ripped 3rd gear it felt like i loosened something up then it started clicking.
Then later i destroyed it in sec gear.
Imagine a 5'' shifter extension on a short shifter and the extra leverage it gave me!
But it goes in gear weather it wants to or not.
Then later i destroyed it in sec gear.
Imagine a 5'' shifter extension on a short shifter and the extra leverage it gave me!

But it goes in gear weather it wants to or not.
Trending Topics
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
First hand i know 5th gear is a little higher makeing it more useful in town, and i have heard some of the later j-specs have stronger bearings and such but im not an expert!
Plus they have less mile as a rule.
Plus they have less mile as a rule.
ya know im currently doing a tranny rebuild its not as hard as it sounds. give it a shot, crack it open find out what you need call a mazda dealership and get it ordered. alot cheaper.
worst case scenario your out a broken tranny lol
worst case scenario your out a broken tranny lol
Joined: Aug 2002
Posts: 4,152
Likes: 0
From: Pittsburg, KS.
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Ill call you and thanks.
I would have thought the diff would have gone first oh well live and learn.
You know this wouldnt have happened if i werent haveing fun so i cant complain and the motor sounds good still after 3 years.
I would have thought the diff would have gone first oh well live and learn.
You know this wouldnt have happened if i werent haveing fun so i cant complain and the motor sounds good still after 3 years.
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Just before the trannie broke...... http://www.youtube.com/watch?v=aqEEUCZUGRU
Just before the trannie broke...... http://www.youtube.com/watch?v=aqEEUCZUGRU 

Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO
Thanks but i dont know if 5th gear works im a pussie so 4th is all i know.
Eric it might have slipped up a couple lbs some how!
And its been a year or so since i looked at the plugs.
Im just glad the trannie didnt lock up and give me another heart attack on that pull.
You NY guys must find it hard to find a clear highway with no one for miles.
Theres an 800 hp all wheel drive talon here that would just kill me on the highway so i avoid him.
Eric it might have slipped up a couple lbs some how!

And its been a year or so since i looked at the plugs.
Im just glad the trannie didnt lock up and give me another heart attack on that pull.
You NY guys must find it hard to find a clear highway with no one for miles.
Theres an 800 hp all wheel drive talon here that would just kill me on the highway so i avoid him.
No one for miles?, maybe upstate NY. The geniuses over here just block the highway with 4 SUV's until the race is over. Its pretty interesting to see, the truck drivers actually get out and watch its so common. This is why NY needs a drag strip asap.
Thread Starter
Will work for horsepower
Joined: Mar 2006
Posts: 1,865
Likes: 1
From: Springfield, MO

Im the only rx7 that runs here and it gets real lonely i wish some others would join in.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM



