battle of the imports@Bakersfield all motor Rene 10:30@130..
10-29-07, 02:05 PM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: fontana CA.
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
battle of the imports@Bakersfield all motor Rene 10:30@130..
battle of the imports@Bakersfield C.A 10/28 all motor rene from RMS runs a 10:30@130 after pomona and finding he's electrical problem on the car ...
10-29-07, 02:41 PM
#3
All the hard work is starting to pay off!!
CONGRATULATIONS!!!!!!!!!!!!
Rene it's starting to come together good job. I might have to consider installing that Microtech.
Good way to end the year. Next year should be alot of fun.
YOU DA MAN NOW!!!!!!!
At least here on the West Coast.
Good luck at Fontana in a couple of weeks.
Rene it's starting to come together good job. I might have to consider installing that Microtech.
Good way to end the year. Next year should be alot of fun.
YOU DA MAN NOW!!!!!!!
At least here on the West Coast.
Good luck at Fontana in a couple of weeks.
10-29-07, 11:08 PM
#7
Rotary Enthusiast
Thanks everyone,yes everything is coming together now.I was shocked to see that
first pass of the trailer since pomona race and run deep into the 10's.
Hope to do some more tuning to the rx7 and run better #s for the next race
at Fontana CA Nov 10-11 sat and sunday.Hope to see some of you rotary people outhere and bring your cars to the race event.There are car shows and lots of 1/4 mile racing,I hope i run better times to kick some piston ***.
first pass of the trailer since pomona race and run deep into the 10's.
Hope to do some more tuning to the rx7 and run better #s for the next race
at Fontana CA Nov 10-11 sat and sunday.Hope to see some of you rotary people outhere and bring your cars to the race event.There are car shows and lots of 1/4 mile racing,I hope i run better times to kick some piston ***.
Trending Topics
10-29-07, 11:16 PM
#9
come get some.....
iTrader: (2)
Join Date: Dec 2006
Location: bayamon pr, orlando fl, paterson nj
Posts: 1,763
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone,yes everything is coming together now.I was shocked to see that
first pass of the trailer since pomona race and run deep into the 10's.
Hope to do some more tuning to the rx7 and run better #s for the next race
at Fontana CA Nov 10-11 sat and sunday.Hope to see some of you rotary people outhere and bring your cars to the race event.There are car shows and lots of 1/4 mile racing,I hope i run better times to kick some piston ***.
first pass of the trailer since pomona race and run deep into the 10's.
Hope to do some more tuning to the rx7 and run better #s for the next race
at Fontana CA Nov 10-11 sat and sunday.Hope to see some of you rotary people outhere and bring your cars to the race event.There are car shows and lots of 1/4 mile racing,I hope i run better times to kick some piston ***.
thats what i am talking about
10-30-07, 12:08 AM
#10
Rotary Enthusiast
All Motor video from BOTI 10sec pass
Here is a link to the race from last weekend at BOTI running the
10 sec pass right off the trailer.
enjoy.
http://vids.myspace.com/index.cfm?fu...deoID=21087168
10 sec pass right off the trailer.
enjoy.
http://vids.myspace.com/index.cfm?fu...deoID=21087168
10-30-07, 01:16 AM
#11
come get some.....
iTrader: (2)
Join Date: Dec 2006
Location: bayamon pr, orlando fl, paterson nj
Posts: 1,763
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to the race from last weekend at BOTI running the
10 sec pass right off the trailer.
enjoy.
http://vids.myspace.com/index.cfm?fu...deoID=21087168
10 sec pass right off the trailer.
enjoy.
http://vids.myspace.com/index.cfm?fu...deoID=21087168
10-30-07, 07:59 AM
#12
Rotary Freak
Thanks everyone,yes everything is coming together now.I was shocked to see that
first pass of the trailer since pomona race and run deep into the 10's.
Hope to do some more tuning to the rx7 and run better #s for the next race
at Fontana CA Nov 10-11 sat and sunday.Hope to see some of you rotary people outhere and bring your cars to the race event.There are car shows and lots of 1/4 mile racing,I hope i run better times to kick some piston ***.
first pass of the trailer since pomona race and run deep into the 10's.
Hope to do some more tuning to the rx7 and run better #s for the next race
at Fontana CA Nov 10-11 sat and sunday.Hope to see some of you rotary people outhere and bring your cars to the race event.There are car shows and lots of 1/4 mile racing,I hope i run better times to kick some piston ***.
10-30-07, 11:57 PM
#14
Rotary Enthusiast
thanks again,and yes judge ito.. the Rx7 seems to bog just a bit because
of my gearing and if i had a little more gear to compensate it will probably improve
my 60ft and 1/4 mile ET.
For the next race i will try some more tuning and play with some tire pressures to
compensate for the stall.I did ran with some low tire pressure plus the track was
really good and sticky.
of my gearing and if i had a little more gear to compensate it will probably improve
my 60ft and 1/4 mile ET.
For the next race i will try some more tuning and play with some tire pressures to
compensate for the stall.I did ran with some low tire pressure plus the track was
really good and sticky.
10-31-07, 01:07 AM
#15
Rene
What was the tire pressure?
With a good 60ft it should have no problem running a 9 or 10.0's pass. Bring up the two step to 10/10.5krpm. Tire pressure around 10psi and it should have a 6xx gear in there then just let it rip and put all those hondas on the trailer!
What was the tire pressure?
With a good 60ft it should have no problem running a 9 or 10.0's pass. Bring up the two step to 10/10.5krpm. Tire pressure around 10psi and it should have a 6xx gear in there then just let it rip and put all those hondas on the trailer!
10-31-07, 01:41 PM
#16
Rotary Enthusiast
yeah i have been running about 10 to 11 psi on tires.
My Rx7 did a 1.43 60ft on that pass and also on the rest of
the 10sec passes almost identical.
I thought i had my car weighed proper,turns out the scales at
some places vary.I did get a chance to weigh the Rx7 at an official
scale and the Rx7 weighed 2100lbs excatly after the runs.
The big problem i have is that i have a chevrolet 12bolt rear end at this time,
and i really need a ford 9"to play with some gears.But for the moment i
will not mess with the rear end right now just concentrate in getting the Rx7
ready for the next race.
My Rx7 did a 1.43 60ft on that pass and also on the rest of
the 10sec passes almost identical.
I thought i had my car weighed proper,turns out the scales at
some places vary.I did get a chance to weigh the Rx7 at an official
scale and the Rx7 weighed 2100lbs excatly after the runs.
The big problem i have is that i have a chevrolet 12bolt rear end at this time,
and i really need a ford 9"to play with some gears.But for the moment i
will not mess with the rear end right now just concentrate in getting the Rx7
ready for the next race.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
