1985 rx7 street legal
#1
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
1985 rx7 street legal
whats up guys
my brother has a 1985 rx7 full body, full interior w/ sound system and dvd head unit.. everything on car works from power windows to the windshield wipers.... the car is running a cosmo engine semi-bridge with a gt42 74mm turbo 4 injectors on gas (q-16)...as far as the drive tran we are running a stock turbo 2 trans... in the rear we have a chevy 10 bolt w/ coilovers in the factory location . tubs are not modified factory tubs runnin a 26x8.5-15tire.
so far the best time we gotten out the car is 9.40@142 34psi off the grove in 4th gear...
60' 1.40
330' 4.00
660' 6.06
mph 117.5
1000' 7.84
1320' 9.40
mph 142.3
previous pass we ran 9.54@149mph 30psi
60' 1.39
330' 4.07
660' 6.19
mph 114.4
1000' 8.02
1320' 9.54
mph 149.9
http://72.167.101.30/asfalto/fotos/09-12-20s/00052.jpg
http://72.167.101.30/asfalto/fotos/09-12-20s/00204.jpg
http://www.youtube.com/watch?v=mOSReywgb_Q
my brother has a 1985 rx7 full body, full interior w/ sound system and dvd head unit.. everything on car works from power windows to the windshield wipers.... the car is running a cosmo engine semi-bridge with a gt42 74mm turbo 4 injectors on gas (q-16)...as far as the drive tran we are running a stock turbo 2 trans... in the rear we have a chevy 10 bolt w/ coilovers in the factory location . tubs are not modified factory tubs runnin a 26x8.5-15tire.
so far the best time we gotten out the car is 9.40@142 34psi off the grove in 4th gear...
60' 1.40
330' 4.00
660' 6.06
mph 117.5
1000' 7.84
1320' 9.40
mph 142.3
previous pass we ran 9.54@149mph 30psi
60' 1.39
330' 4.07
660' 6.19
mph 114.4
1000' 8.02
1320' 9.54
mph 149.9
http://72.167.101.30/asfalto/fotos/09-12-20s/00052.jpg
http://72.167.101.30/asfalto/fotos/09-12-20s/00204.jpg
http://www.youtube.com/watch?v=mOSReywgb_Q
#5
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.... I have the video of 1/4 mile pass but unable to post its on a mini dvd that a buddy gave me b4 I left nj . I jus recently moved to florida couple months back. The car ran 9.40 in island dragway in nj. I once dynoed the car on a mustang dyno with no msd on c16 at 30 psi it did 616 to the wheels. Never dynoed after changes were made.
Trending Topics
#8
Banned. I got OWNED!!!
Join Date: Dec 2007
Location: paradise Florida
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
thats really impressive considering that its a full street car.
my question, if you can answer it, is what it runs on pump and street tires. to me thats what really matters when you have a street car.
my question, if you can answer it, is what it runs on pump and street tires. to me thats what really matters when you have a street car.
#10
Rotary Enthusiast
http://agracingvideo.com/videos/orlando/13dic09/31.wmv....... nice car
#11
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
pportnosgsl
very nice,congrats,post up some more pics,engine bay etc.
thanks, here's a couple more pic i try to post more later.....
61620B
http://agracingvideo.com/videos/orlando/13dic09/31.wmv....... nice car
thanks bro...
Chaotic_FC
thats really impressive considering that its a full street car.
my question, if you can answer it, is what it runs on pump and street tires. to me thats what really matters when you have a street car
thanks... built a couple cars up north pump gas and street tires when i put this one together i jus went for it all... my car is street legal not my daily driver.... i hope i answered ur question...
very nice,congrats,post up some more pics,engine bay etc.
thanks, here's a couple more pic i try to post more later.....
61620B
http://agracingvideo.com/videos/orlando/13dic09/31.wmv....... nice car
thanks bro...
Chaotic_FC
thats really impressive considering that its a full street car.
my question, if you can answer it, is what it runs on pump and street tires. to me thats what really matters when you have a street car
thanks... built a couple cars up north pump gas and street tires when i put this one together i jus went for it all... my car is street legal not my daily driver.... i hope i answered ur question...
#15
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
we were suppose to have a race later that night wit the moreno's around are way(v8 crew) thats why we were running no time.... we got kicked out after the second pass....
#16
Rotary Freak
I'll give you guys some history/bio behind the owner of this car. First I'll say, Brandi hope your mom and dad are doing well. Brandi (sister) and Eddie (owner of the car) are being quite humble. Eddie and Brandi were born into the world of import drag racing. and into the wonderful world of rotary engines. Eddie/Brandi's Father is very well respected in our neck of the woods. locals in the tri-state area, new york,new jersey and connecticut knew who was top dog in the mid 80's Listen folks Im talking about 1985 to 1987 Eddie's Father was running 11.45@115mph ALL MOTOR with his 1975 mazda rx3 with a stock chassis,traction bars,Rx4 gearbox and stock mazda rear on a 13B bridgeport using a holley 650cfm carburator. forgot to add 13 inch m/t 24x7 slicks. later they made the car half chassis and ran 11.2 then parked the car to go full chassis.
I remember, I was 14 years old back in 1985 when @ island dragway Eddie's father broke his factory driveshaft on one of his 11.4 all motor runs and my older brother Abel, loaned Eddie's Dad the driveshaft out of his daily driver Rx3, so Eddie's dad could continue to test and tune. This car sounded so wicked!! I mean that brap,brap,brap was wicked! Car use to rev strong and would always pull hard through the gears. those were some good memories. Eddie and his Dad played around with this rx7 with some nitrous on a bridgeport a few years ago. they got to run low 11's and it was a daily driver. Later Eddie went turbo and built this car totally from scratch on its current turbo set-up. Car is running super impressive and I am xtremely proud of Eddie.
How do I know this? simple, Eddie grew up around me and I treat him like family. So Eddie and this first gen rx7 are here to stay.. hope all is well down in florida Eddie.
I remember, I was 14 years old back in 1985 when @ island dragway Eddie's father broke his factory driveshaft on one of his 11.4 all motor runs and my older brother Abel, loaned Eddie's Dad the driveshaft out of his daily driver Rx3, so Eddie's dad could continue to test and tune. This car sounded so wicked!! I mean that brap,brap,brap was wicked! Car use to rev strong and would always pull hard through the gears. those were some good memories. Eddie and his Dad played around with this rx7 with some nitrous on a bridgeport a few years ago. they got to run low 11's and it was a daily driver. Later Eddie went turbo and built this car totally from scratch on its current turbo set-up. Car is running super impressive and I am xtremely proud of Eddie.
How do I know this? simple, Eddie grew up around me and I treat him like family. So Eddie and this first gen rx7 are here to stay.. hope all is well down in florida Eddie.
#18
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
bendicion tio ito,
whats up its eddie... how u doing its been a minute hope all is good.... thanks for the compliments means alot coming from you... i really appreciate it feels good after all the homework and time that i put into this car in dat cold garage in jersey... had alot to learn as you know no1 in my family likes them turbos. my parents are doing good thank god for that... my dad says whats up, u got him reminition bout the old days.... he remembered them days clearly..... maybe he would of been still running all motor if it was for u to introduce him to the magic bottle of NOS.... they still running the same car....btw my mother read wat u wrote and brought tears to her eyes she said to tell you she aint got nuttin but love for you.... the track reopens jan..10th down here im trying to get a full pass in but the car is lost in the 330' recently had to lower the 2step to 7200 to get a 6.09 @117mph imma leave it alone n get to the 1/4.... hopefully the car will run 9.30 like it is if so then we gonna shoot it and wish for the best...
have u been workin on your car and hows the driver( ur daughter)???? tell everyone i said wats up
take care bendicion
whats up its eddie... how u doing its been a minute hope all is good.... thanks for the compliments means alot coming from you... i really appreciate it feels good after all the homework and time that i put into this car in dat cold garage in jersey... had alot to learn as you know no1 in my family likes them turbos. my parents are doing good thank god for that... my dad says whats up, u got him reminition bout the old days.... he remembered them days clearly..... maybe he would of been still running all motor if it was for u to introduce him to the magic bottle of NOS.... they still running the same car....btw my mother read wat u wrote and brought tears to her eyes she said to tell you she aint got nuttin but love for you.... the track reopens jan..10th down here im trying to get a full pass in but the car is lost in the 330' recently had to lower the 2step to 7200 to get a 6.09 @117mph imma leave it alone n get to the 1/4.... hopefully the car will run 9.30 like it is if so then we gonna shoot it and wish for the best...
have u been workin on your car and hows the driver( ur daughter)???? tell everyone i said wats up
take care bendicion
#21
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
idk if you looked at the pics but there is a pic of my car (blue), the turbo (white), demente, and theres a darker blue first gen in there too.. if thats the one ur talking bout its not fam just a car we built for the neighbor....
#22
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
hey tio ito what sup ... long time no see... sry eddie cant spell (remenision lol) I guess thats what they got me for lol...the entire fam says hi.. we are all good... im doing good as well... just graduated w/ 31 college credits so im guna put them towards becoming an engineer this way you can let me know when you need something invented lol ... i hope all is good... you def need to keep in touch more.. i havnt seen you since i was a baby basically lol... what you wrote was very nice... we are all very proud of eddie... he did this all on his own but you kno how he is- very humble about every accomplishment hes made.. you had us all laughin thinkin about the past and sharing stories afterwards... hope all is well.. tell everyone we say hi.. kit ttul
#23
Congrats on your time as well.. Car is fast and by looking at your other time slip it's got more in it for sure..
#24
Full Member
Thread Starter
Join Date: Aug 2009
Location: Orlando, FL
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
lol yeah he drives a white first gen 84 ..we are always out at the meets.. havnt been lately bc he has left to the navy... but i will for sure be at the next one at old town with a friend.. havnt been able to get in touch with luis.. i dunno wen it is.. do u kno if there is one the 1st? im not sure of what video he showed you but it mite be it..
#25
Rotary Freak
Hey Eddie, god bless you,Brandi, and Brandon. Eddie keep us up to date on this site with the progress of your car.
Hey Brandi, bless you much, congrats on finishing school, and I wish you the best on your college journey. I don't want to talk about the old days and my rampages cause I'll cluter Eddie's thread with something like a book of drag racing history.
Tell your dad I said hello and I also got nothing but love for your mom. Hey Brandi you surprised me! I would never have figured you would turn out to be a hard core rotorhead. Behave and Tio Ito Loves you and your family much..
Hey Brandi, bless you much, congrats on finishing school, and I wish you the best on your college journey. I don't want to talk about the old days and my rampages cause I'll cluter Eddie's thread with something like a book of drag racing history.
Tell your dad I said hello and I also got nothing but love for your mom. Hey Brandi you surprised me! I would never have figured you would turn out to be a hard core rotorhead. Behave and Tio Ito Loves you and your family much..