Worth it for 1400????
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Mission Viejo
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Worth it for 1400????
my friends shop is going to put me together a v mount setup for 1400
1400 covers a koyo kit for stock location, a custom spearco 20"x10"x2.5-3" intercooler. also included all instalation and piping
so would this setup be worth it
the intercooler would sit above the koyo at a slant.
any ideas??
and the intercooler will drop my psi by like 1.5, could i just adjust my boost contoller so i get the full 10 with out leaning out my car?
1400 covers a koyo kit for stock location, a custom spearco 20"x10"x2.5-3" intercooler. also included all instalation and piping
so would this setup be worth it
the intercooler would sit above the koyo at a slant.
any ideas??
and the intercooler will drop my psi by like 1.5, could i just adjust my boost contoller so i get the full 10 with out leaning out my car?
#3
Originally Posted by Manolis_D
IC won't drop boost pressure. Should increase boost if anything...
Depending on brand, type, and piping, the drop could be minimal or severe.
All IC's however great or poor the quality may be WILL INCREASE " Charge Air Density"
This Delta Rise will require a change in mixture strenth.
#4
Rotary Enthusiast
iTrader: (2)
Join Date: Sep 2001
Location: Altadena, CA
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GT1-20b
All IC's have a presure drop across them.
#5
Hey, where did my $$$ go?
Join Date: Feb 2001
Location: Bimingham, AL
Posts: 4,413
Likes: 0
Received 0 Likes
on
0 Posts
yes $1400 will be a good price if its done right. The rad cant sit in teh stock location for a vmount though...they need to invert it so that the bottom of the rad is toward the bumper and the top of the rad is toward the engine. This way when the IC is layed on top the IC and rad will make a V. This is going to require them making some custom brakets, ect for the radiator. If they are going to do all that for $1400 including the cost of the Koyo, Spearco core, pipes, couplings, clamps, brakets then you need to have them start selling this as a damn kit cause thats cheap.
I have a feeling they dont know what they are getting into. They are going to spend at least $1000 just on the materials.
Stephen
I have a feeling they dont know what they are getting into. They are going to spend at least $1000 just on the materials.
Stephen
Thread
Thread Starter
Forum
Replies
Last Post