Rotary Car Performance General Rotary Car and Engine modification discussions.

wish me luck!!!!

Thread Tools
 
Search this Thread
 
Old Feb 19, 2003 | 10:05 PM
  #1  
turbostreetfighter's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 445
Likes: 0
From: houston
wish me luck!!!!

gonna compete in my first actual race this weekend! there is a fairly large 1/8 mile event this weekend at Seally raceway in Sealy texas. test and tune saturday and event on sunday. the car is running good although i cannot run as much boost as i want until i get another pump but since it is only 1/8 mile i might be able to push it a little bit and get 26 psi out of it!!

it is a bunch of hillbillies and rednecks and i dont even know if they will let me run or not ( dual power adder and 2300 lbs) so i may end up bracket racing :-( either way i will get some good seat time in the car.


MWW ......kinda excited!!.....

Last edited by turbostreetfighter; Feb 19, 2003 at 10:08 PM.
Reply
Old Feb 19, 2003 | 10:12 PM
  #2  
moprblms's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 119
Likes: 0
From: New York
Give em hell and good luck don't break anything
Reply
Old Feb 19, 2003 | 10:59 PM
  #3  
Car Collector
Tenured Member 20 Years
 
Joined: Jul 2002
Posts: 281
Likes: 0
From: Woodbridge, VA
Good Luck man! I wish my car was running and there was no snow on the ground so I could go race again good luck and kick some ***
Reply
Old Feb 20, 2003 | 06:27 AM
  #4  
banzaitoyota's Avatar
What Subscription?
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 5,926
Likes: 2
From: Aiken SC USA
Good Luck!!!!
Reply
Old Feb 20, 2003 | 06:33 AM
  #5  
Judge Ito's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Oct 2001
Posts: 1,568
Likes: 2
From: N.J. USA
keep us posted and let us know your E.T.'s and 60's
Reply
Old Feb 20, 2003 | 04:02 PM
  #6  
93 R1's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 1,734
Likes: 0
From: maryland
Give it some hell, but don't break it.
Reply
Old Feb 20, 2003 | 04:16 PM
  #7  
Kenku's Avatar
spoon!
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 1,208
Likes: 50
From: Dousman, WI
I can't wait to hear some results... good luck man, and don't break.
Reply
Old Feb 20, 2003 | 04:41 PM
  #8  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
good luck!
Reply
Old Feb 20, 2003 | 05:49 PM
  #9  
Full Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 152
Likes: 0
From: New york
Them there rednecks need to see something different. Go turn a few heads and let us know how things work out.
Reply
Old Feb 21, 2003 | 12:43 AM
  #10  
crispeed's Avatar
'Tuna'
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Lot's of luck Marcus!
Let us know how everything turned out.

crispeed
87 Rx-7 TII
9.204@150.47mph
2600lbs
un-tubbed
Reply
Old Feb 21, 2003 | 01:01 AM
  #11  
680RWHP12A's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2002
Posts: 4,666
Likes: 2
From: chatsworth,Ca.
good luck! knock those hillbillys out!
Reply
Old Feb 21, 2003 | 02:59 AM
  #12  
HeffBoost's Avatar
Keep Right Except to Pass
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 984
Likes: 1
From: Seattle
don't break it
If you don't, then you're not trying hard enough. lol j/k

Give 'em Hell.
Reply
Old Feb 21, 2003 | 06:16 AM
  #13  
KNONFS's Avatar
B O R I C U A
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (14)
 
Joined: Mar 2001
Posts: 5,482
Likes: 36
From: VA
Good Luck,

And let us know the outcome
Reply
Old Feb 21, 2003 | 06:45 AM
  #14  
Node's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (1)
 
Joined: Jul 2001
Posts: 3,383
Likes: 3
From: Stinson Beach, Ca
Good luck!~
Reply
Old Feb 21, 2003 | 05:24 PM
  #15  
turbostreetfighter's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 445
Likes: 0
From: houston
well due to mother nature going ballistic this afternoon, the 1/8 mile track is not going to run tomorrow but should still be able to run sunday. i am going to houston raceway tomorrow and test and tune out there, i did not get a chance to put another pump on the car so i doubt if i will be able to get into the 8's but should get close.
thanx for all of the support!!!

and Node your sig is ******* halarious!!!!!


MWW
Reply
Old Feb 21, 2003 | 10:23 PM
  #16  
Scalliwag's Avatar
WingmaN
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 4,324
Likes: 0
From: Fort Worth Texas
Originally posted by turbostreetfighter

and Node your sig is ******* halarious!!!!!

MWW
Is that one of the "hillbillies"?
Reply
Old Feb 22, 2003 | 12:10 AM
  #17  
crispeed's Avatar
'Tuna'
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by turbostreetfighter
i did not get a chance to put another pump on the car so i doubt if i will be able to get into the 8's but should get close.
thanx for all of the support!!!

MWW
Hey Marcus what are you running presently for a fuel pump?

crispeed
87 RX-7 TII
9.204@150.47mph
2600lbs
un-tubbed
Reply
Old Feb 22, 2003 | 12:15 AM
  #18  
crispeed's Avatar
'Tuna'
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by Scalliwag
Is that one of the "hillbillies"?
If you can read his lips it says something like......'squeel, squeeeel, squeeeeeeel like a pig sucker!')

crispeed
Reply
Old Feb 22, 2003 | 01:16 AM
  #19  
Node's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (1)
 
Joined: Jul 2001
Posts: 3,383
Likes: 3
From: Stinson Beach, Ca
Originally posted by turbostreetfighter
and Node your sig is ******* halarious!!!!!
MWW
Thanks
Tear **** up.
You should bring a boom box with you and blast some shitty 80s music right before you run. Like Chaka Kahn - I feel for You
Reply
Old Feb 23, 2003 | 08:03 AM
  #20  
Scalliwag's Avatar
WingmaN
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 4,324
Likes: 0
From: Fort Worth Texas
Originally posted by Node
Thanks
Tear **** up.
You should bring a boom box with you and blast some shitty 80s music right before you run. Like Chaka Kahn - I feel for You
How about the song that always pumps people into frenzies? Sammy Hagar- I can't drive 55. Or something to irritate your competition with.. Nazareth- "Hair of the dog" Yeah... "Now your messin' with a.... a son of a bitch!"............... Now there are some lyrics with meaning!
Reply
Old Feb 23, 2003 | 08:59 AM
  #21  
Node's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (1)
 
Joined: Jul 2001
Posts: 3,383
Likes: 3
From: Stinson Beach, Ca
or some classic, just BLAST it, flight of the valkyries or whatever that song is
Reply
Old Feb 23, 2003 | 06:33 PM
  #22  
setzep's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 2,524
Likes: 0
From: MN
screw all this music talk, how did you do turbostreetfighter??
Reply
Old Feb 23, 2003 | 06:55 PM
  #23  
turbostreetfighter's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 445
Likes: 0
From: houston
Crispeed i have a single 2025a!!!! i knew i was going to need two of them and now i do!! the race was canceled due to the enormous amount of rain that fell friday!! so i went to baytown to attempt to a few passes and had nothing but bad luck the whole day. while doing the burnout i went into top gear and the power fell off , it felt like a pipe came off. when i went to stage it would not go over 4500 on the brake with NOS...so i just rolled out and cruised down the track at a record breaking 15.90 @ 42 mph!!! when i got back to the pits and shut the car off it would not start back up? felt like it was dragging the starter. after about 30 minutes it started up like nothing was wrong and went on the brake to 6500 rpms and 1.7 bar!! so i lined back up and did a light burnout and it did the same **** again! i dont know WTF is going on!


MWW
Reply
Old Feb 23, 2003 | 11:11 PM
  #24  
crispeed's Avatar
'Tuna'
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 4,637
Likes: 3
From: Miami,Fl,USA
Originally posted by turbostreetfighter
Crispeed i have a single 2025a!!!! i knew i was going to need two of them and now i do!! the race was canceled due to the enormous amount of rain that fell friday!! so i went to baytown to attempt to a few passes and had nothing but bad luck the whole day. while doing the burnout i went into top gear and the power fell off , it felt like a pipe came off. when i went to stage it would not go over 4500 on the brake with NOS...so i just rolled out and cruised down the track at a record breaking 15.90 @ 42 mph!!! when i got back to the pits and shut the car off it would not start back up? felt like it was dragging the starter. after about 30 minutes it started up like nothing was wrong and went on the brake to 6500 rpms and 1.7 bar!! so i lined back up and did a light burnout and it did the same **** again! i dont know WTF is going on!


MWW
Marcus!
Sorry to hear that but that's all part of the game we love so much. It's called 'New car bugs'. Don't worry you'll figure it out. The best thing you can do is to get together with some buddies and rent the track and you'll have all the time to work out the bugs.
As for your fuel pump I think you're pushing your luck especially at 1.7 bar!

crispeed
87 Rx-7 TII
9.204@150.47mph
2600lbs
un-tubbed
Reply
Old Feb 24, 2003 | 09:19 AM
  #25  
turbostreetfighter's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 445
Likes: 0
From: houston
yeah, i know!!!! luckily i am running a 16 volt system and that gives me a little more headroom. i did not expect to go full throttle all the way down the track anyway, i was going to blast out of the hole on the first pass and see how far i could go before it started to lean out!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
portugueserotary
NE RX-7 Forum
4
Oct 4, 2015 08:30 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
8
Oct 2, 2015 08:08 AM
Captain Hook
2nd Generation Specific (1986-1992)
8
Sep 22, 2015 01:12 PM
Evan Kurtz
New Member RX-7 Technical
4
Sep 13, 2015 08:40 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 10:20 PM.