Street Porting Question
#1
Rotary Freak
Thread Starter
Join Date: Nov 2004
Location: Austin-Houston Texas
Posts: 1,879
Likes: 0
Received 0 Likes
on
0 Posts
Street Porting Question
I ordered some street ported Irons for my s4 Turbo II. Well the question is ... Are the middle housings supposed to be ported??
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Only your supplier can anser that.
If only the secondary ports are enlarged, the idle and low end will be more like stock depending on how much the exhaust is ported.
If the primary ports are also enlarged, you idle and low end will not be as smooth or strong.
If only the secondary ports are enlarged, the idle and low end will be more like stock depending on how much the exhaust is ported.
If the primary ports are also enlarged, you idle and low end will not be as smooth or strong.
Last edited by cewrx7r1; 05-09-05 at 10:37 PM.
#5
putting it down daily
Good stuff to know. I am having some irons ported, and elected to go with a mild port on the primaries to keep some low end to push around my heavy 'vert.
Am I sacrificing some top end here? If so, no biggie- I will be driving this daily and prefer not to have a sketchy idle.
Oh, yeah, sorry about the threadjack (at least I stayed on topic! )
Am I sacrificing some top end here? If so, no biggie- I will be driving this daily and prefer not to have a sketchy idle.
Oh, yeah, sorry about the threadjack (at least I stayed on topic! )
#7
Rotary Freak
Thread Starter
Join Date: Nov 2004
Location: Austin-Houston Texas
Posts: 1,879
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/showthread.p...1&page=1&pp=15
here is a link with the pics of the ports please gived me feed back
here is a link with the pics of the ports please gived me feed back
Trending Topics
#9
Chicken Adobo
iTrader: (6)
Join Date: Jul 2004
Location: City of Angels
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
By the looks of that picture, the center plate looks more smoothed out for flow rather than ported for timing. It looks like the stock port size for a s4t2 center plate, best way to know is really ask that guy you bought them from.
#11
0000-09-0233
Join Date: Jun 2003
Location: Fort Wankel
Posts: 1,317
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by introVert
Good stuff to know. I am having some irons ported, and elected to go with a mild port on the primaries to keep some low end to push around my heavy 'vert.
Am I sacrificing some top end here? If so, no biggie- I will be driving this daily and prefer not to have a sketchy idle.
Oh, yeah, sorry about the threadjack (at least I stayed on topic! )
Am I sacrificing some top end here? If so, no biggie- I will be driving this daily and prefer not to have a sketchy idle.
Oh, yeah, sorry about the threadjack (at least I stayed on topic! )
this is not true, if you find someone who thoroughly knows the importance of proper porting and cares enough to take their time you will not have this problem. the 12A in my car has has each of its intake ports opened to an extend port (similar to Judge Ito's large secondary). I am talking about both the primary and seconandary ports.... all opened to be huge.
Brian may recall seeing my RX-3 at rev. it idles at a lumpy 700 rpm, with off idle torque... makes a great autoX engine... even coming out of the corners under load. it pulls great. with some playing with the idle adjust screws it will maintain enough air velocity to sit at 400 rpm.
A TII engine i just finished for a friend will idle at 150 RPM... I couldnt believe it either.....
my point is, don't let someone who shouldn't be porting in the first place get one over on you by saying that porting the primary ports will greatly affect low RPM and Idle.
#12
Moderator
iTrader: (3)
Originally Posted by SS124A
my point is, don't let someone who shouldn't be porting in the first place get one over on you by saying that porting the primary ports will greatly affect low RPM and Idle.
streetports, even larger ones, can idle smoothly and still be very friendly from a dead stop on a steep hill. it depends on who you get to port the engine and then who you get to tune it once running.
#13
Rotary Freak
Thread Starter
Join Date: Nov 2004
Location: Austin-Houston Texas
Posts: 1,879
Likes: 0
Received 0 Likes
on
0 Posts
well I know my irons were ported from atkins. What I have found out so far about the irons I bought was. They were in a rx7 with a to4e and was a high rev monster