Replacing primary injectors on a RE?
#1
Full Member
Thread Starter
Join Date: Nov 2002
Location: FL
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Replacing primary injectors on a RE?
What have you guys done to use a bigger primary injector on a 13b-re motor? they have some type of special 550cc primaries, that take the place of the air bleed diffusers on the re motor, but the rew uses a side feet with a diffuser. Can i just swap to a fd fuel rail/ air bleed diffusers and upgrade from there, or is there a more custom approach?
Any conversions are welcome, like if a s4 fuel rail could be adapted as well, I have those laying around here.
thanks in advance
Any conversions are welcome, like if a s4 fuel rail could be adapted as well, I have those laying around here.
thanks in advance
#3
Full Member
Thread Starter
Join Date: Nov 2002
Location: FL
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
i have a couple top feed injectors already, i was mainly curious how to upgrade the primaries because they have some type of special tip on the side feed injector. would it work if i just used a fd primary fuel rail?
i want to run some fd 850 cc injectors for my primaries if i can rig it up
i want to run some fd 850 cc injectors for my primaries if i can rig it up
#5
Junior Member
The FD primary injectors look very similar to the RE primaries. Considering that 850s can be easily installed into the FD primaries, I expect that the RE engine can use 850s as the primaries.
The secondaries on the RE are different to the FD's.
That's about what I can remember.
The secondaries on the RE are different to the FD's.
That's about what I can remember.
Trending Topics
#8
Banned. I got OWNED!!!
You CAN use ANY FD primary fuel rail. I purchased a set from KGPARTS.com and it bolted in EASY! Hey VILA, how's my 2ndary fuel rail coming, can't wait to get it?
#9
Lives on the Forum
Originally Posted by 88fc3sw/HX83
You CAN use ANY FD primary fuel rail. I purchased a set from KGPARTS.com and it bolted in EASY! Hey VILA, how's my 2ndary fuel rail coming, can't wait to get it?
#10
Full Member
Thread Starter
Join Date: Nov 2002
Location: FL
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rxrotary2_7
Yep, I have primary and secondary rails ready to ship for RE motor if needed .
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM