Rotary Car Performance General Rotary Car and Engine modification discussions.

Pfs Ic/max Boost!

Thread Tools
 
Search this Thread
 
Old Feb 21, 2002 | 03:04 PM
  #1  
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Dec 2001
Posts: 103
Likes: 0
From: uk
Pfs Ic/max Boost!

Hi

I have the PFS SMIC and was wondering what the safe high boost setting is for that intercooler?

Will I be ok running 1 bar?

Regards...
Reply
Old Feb 22, 2002 | 02:27 PM
  #2  
ErnieT's Avatar
Living life 9 seconds at a time
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
The intercooler is good enough, but that shouldn't be your concern. Your concern is your fuel system. At 13psi, the stock injectors don't pulse anymore, they are at full spray. This is not good. One piece of dirt and boom! Your going to need a bigger fuel pump and (to run safe) bigger secondary injectors. (1200cc) Providing you have all the other bolt on's, this will be fine for 15lbs of boost, but for stock twins I wouldn't run 15psi without race gas regardless of fuel or intercooler. Just some advise. Take it from sombody that had to learn the hard way.....
Reply
Old Feb 23, 2002 | 01:51 AM
  #3  
maxcooper's Avatar
WWFSMD
Tenured Member 15 Years
 
Joined: Jun 2001
Posts: 5,035
Likes: 4
From: SoCal
Ernie, I agree wholeheartedly with your recommendations, but I don't understand the dirt thing. What changes at 100% injector duty that would make dirt worse in that situation?

-Max
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
Jul 17, 2019 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
High_Carb_Diet
Power FC Forum
1
Sep 5, 2015 09:07 AM




All times are GMT -5. The time now is 07:22 PM.