Microsoft is looking for a 3 rotor
Thread Starter
Joined: Feb 2007
Posts: 374
Likes: 0
From: Seattle, Washington
Microsoft is looking for a 3 rotor
Hello everybody, I dont know which would be the best place on the forum to post this so I will post it in a few places. Moderators feel free to re-direct them to the appropriate sub-forum if needed.
Microsoft is looking for a 3 rotor powered car to use for capturing audio. The 3 rotor engine has a very unique sound and we are hoping to find an extremely aggressive sample that would send shivers down your spine. If you have, or know someone who has a car that might fit the following criteria please let us know:
• 3 Rotor Engine
• Aggressive Exhaust
• Naturally Aspirated (no turbo cars, sorry :[ )
• High RPM Capable (8500+ would be ideal)
• Ported/Polished or Race Tuned a big plus. Think super aggressive!
We would be running your car on loaded dyno while capturing the sound. It’s a pretty cool process and we’ve recorded hundreds of cars before using the same technique. As car people know, there is no substitute for the sound of the real thing, and we appreciate any one willing to help us ensure we capture the true character of the rotary engine!
You can reply here or talk to Lzamboni (me) and we will contact prospective candidates privately. Thank you!
Microsoft is looking for a 3 rotor powered car to use for capturing audio. The 3 rotor engine has a very unique sound and we are hoping to find an extremely aggressive sample that would send shivers down your spine. If you have, or know someone who has a car that might fit the following criteria please let us know:
• 3 Rotor Engine
• Aggressive Exhaust
• Naturally Aspirated (no turbo cars, sorry :[ )
• High RPM Capable (8500+ would be ideal)
• Ported/Polished or Race Tuned a big plus. Think super aggressive!
We would be running your car on loaded dyno while capturing the sound. It’s a pretty cool process and we’ve recorded hundreds of cars before using the same technique. As car people know, there is no substitute for the sound of the real thing, and we appreciate any one willing to help us ensure we capture the true character of the rotary engine!
You can reply here or talk to Lzamboni (me) and we will contact prospective candidates privately. Thank you!
Talk to this guy. The most aggressive sounding 3 Rotor I have ever heard. Even more aggressive sounding than the furai if you ask me...and that is a lot to say.
http://www.youtube.com/watch?v=voYgCPMPVzo
Chris
http://www.youtube.com/watch?v=voYgCPMPVzo
Chris
Mark Maloney's 20b reb bull sponsored rx3 racing at Dover raceway Jamaica.http://www.youtube.com/watch?v=k86Zo...=youtube_gdata
Trending Topics
Mazdee's 20b Perry running on carbs
. Exhaust pulses are very deep in person. 9,000 RPM redline. There's a dyno right beside the shop too and Mosport is only an hours away if you want on track sound.
http://www.youtube.com/watch?v=Cnnm7dnS7cY
http://www.youtube.com/watch?v=3UT5-5FFsC8
Actual track footage...
http://www.youtube.com/watch?v=zbVDpQLtwQY
http://www.youtube.com/watch?v=QeecXC3Hn2E
thewird
. Exhaust pulses are very deep in person. 9,000 RPM redline. There's a dyno right beside the shop too and Mosport is only an hours away if you want on track sound.http://www.youtube.com/watch?v=Cnnm7dnS7cY
http://www.youtube.com/watch?v=3UT5-5FFsC8
Actual track footage...
http://www.youtube.com/watch?v=zbVDpQLtwQY
http://www.youtube.com/watch?v=QeecXC3Hn2E
thewird
PLEASE TELL ME THIS IS FOR FM3!!!
The 3 rotor on FM3 sounds like an n/a 13b with a shitty exhaust.
To the OP, why not get in contact with speedsource and their grand am car?
http://www.youtube.com/watch?v=9yFCCLkLJXM
The 3 rotor on FM3 sounds like an n/a 13b with a shitty exhaust.
To the OP, why not get in contact with speedsource and their grand am car?
http://www.youtube.com/watch?v=9yFCCLkLJXM
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
20B Forum
9
Sep 22, 2015 07:39 PM






