I am currently trying to eliminate the superheating of my LIM via my exhaust manifold and turbo.

Ive made a small heatshild that follows the contor of the LIM from its base to the air control valve and am mounting it with small 1/2" spacers.

Now should i put somesort of heatrejectoin tape on the heatshild? what about the LIM its self?

 

i plan on making a heat shield myself and using that reflective heat shielding material on it on the turbo side of the shield. and wrapping the exhaust and turbo manifold.

 

you could coat the LIM, and the exhaust mani for that matter.

 

coat the UIM, DP, Turbo; use methanol...