FINALLY 10'S on Stock Twins(non-seq) !!
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2001
Location: Union, NJ
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
FINALLY 10'S on Stock Twins(non-seq) !!
Well guys ....just got back from Atco and finally menaged to squeeze a 10 from the baby(tired) twins
Made two passes and after that the guy said:
"You're too deep in the 11's without proper safety equipment!!!"-
Here's the slips:
1st run:
60'= 1.576
330= 4.611
1/8= 7.135 @ 97.59mph
990= 9.270
1/4= 11.182 @ 120.35
2nd run=:
60'= 1.488 <==Yes, on ET streets !!
330= 4.492
1/8= 6.986 @98.38 mph
990= 9.087
1/4= 10.988 @ 121.68 mph
Drove there on ET streets and raced w/ 1/2 tank of gas.
Power FC logs showed boost hitting 1.15kg/cm2(max) and dropping down to 1.12kg/cm2 by 6.4krpm with A/Fs in the 10.6-10.70......all across.
A/F's were 10.8-11.0 last night......not sure were all that extra fuel came from.....at least very safe.
At least I got few domestic guys around the car asking alot of questions......they were impressed with the little motor
JD
Made two passes and after that the guy said:
"You're too deep in the 11's without proper safety equipment!!!"-
Here's the slips:
1st run:
60'= 1.576
330= 4.611
1/8= 7.135 @ 97.59mph
990= 9.270
1/4= 11.182 @ 120.35
2nd run=:
60'= 1.488 <==Yes, on ET streets !!
330= 4.492
1/8= 6.986 @98.38 mph
990= 9.087
1/4= 10.988 @ 121.68 mph
Drove there on ET streets and raced w/ 1/2 tank of gas.
Power FC logs showed boost hitting 1.15kg/cm2(max) and dropping down to 1.12kg/cm2 by 6.4krpm with A/Fs in the 10.6-10.70......all across.
A/F's were 10.8-11.0 last night......not sure were all that extra fuel came from.....at least very safe.
At least I got few domestic guys around the car asking alot of questions......they were impressed with the little motor
JD
#5
Laying Down Rotary Law
WOW awesome!!!!!
did you post a vid yet in ******?
EDIT: you did!!! F'ing unreal
what are you putting down?
I need a HP goal to reach your times
you dump the clutch right?
I can hear the tires sqeel when you take off (Nittos)
What clutch do you have?
I have a 4 puck (sprung)
and a HD ACT plate...not the extreme
If I try to dump the clutch at say 6-7k RPM
It chatters (grabs then slips then grabs)
So I have to slip the clutch instead
did you post a vid yet in ******?
EDIT: you did!!! F'ing unreal
what are you putting down?
I need a HP goal to reach your times
you dump the clutch right?
I can hear the tires sqeel when you take off (Nittos)
What clutch do you have?
I have a 4 puck (sprung)
and a HD ACT plate...not the extreme
If I try to dump the clutch at say 6-7k RPM
It chatters (grabs then slips then grabs)
So I have to slip the clutch instead
Last edited by kabooski; 11-30-03 at 08:58 PM.
#6
Ah... thats nothing impressive... I've been 9.84 on my stock twins 1 rotor video camera
Again Congrats JD...
Here is the videos of his 2 runs today... I just reinstalled windows and updated to the latest Divx codec so you need Divx 5.1.1 or newer. Just go to www.divx.com to d/l
Videos
10.98 @ 121.67
http://forum.vwsport.com/dload.php?action=file&id=2271
11.18 @ 120mph
http://forum.vwsport.com/dload.php?action=file&id=2272
Then he got the big ole BOOOTTTTTT...
Tim
Again Congrats JD...
Here is the videos of his 2 runs today... I just reinstalled windows and updated to the latest Divx codec so you need Divx 5.1.1 or newer. Just go to www.divx.com to d/l
Videos
10.98 @ 121.67
http://forum.vwsport.com/dload.php?action=file&id=2271
11.18 @ 120mph
http://forum.vwsport.com/dload.php?action=file&id=2272
Then he got the big ole BOOOTTTTTT...
Tim
#7
Looking for 10's
iTrader: (63)
Awesome...congrats. Now I really have my work cut out for me. Can you answer a few questions?
What air pressure are you running in the ET streets? What does the car weigh with you in it?
Were you running stock rims all the way around?
What gas were you using?
I am only asking so many questions because I want to go into the low 11's on my stock motor/twins also...
Congrats Again!!!
What air pressure are you running in the ET streets? What does the car weigh with you in it?
Were you running stock rims all the way around?
What gas were you using?
I am only asking so many questions because I want to go into the low 11's on my stock motor/twins also...
Congrats Again!!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
rx8volks
Canadian Forum
3
08-20-15 10:24 PM