CypherNinja

All the lost HP goes into heating the fluid and tranny parts, at a certain point a tranny cooler is a good idea. Unless you LIKE baking the trim on your center console.

rxseven

Yes, it would generate a lot of heat which is transferred to the oil and then the gearbox casing. In general, the higher the input torque, the more cooling surface area you need. That's why rockcrawlers have to have transmission oil coolers.

scathcart

Knowing your flywheel horsepower and rear wheel horsepower is important in minimizing drivetrain losses. Losses through the drivetrain can be minimized, and doing so equates to a higher wheel horsepower value with a minimum stress to the drivetrain and engine.

Would you not care if you put 400 hp to the tires, yet your engine made 2000 hp? You'd certainly be interested in minimizing your drivetrain losses.

fstrnyou

ok, but are you gonna pull your motor just to see what your drivetrain loss is? i'm not. and no one else is either. it was a good point but it's not getting us anywhere. i can tell you one thing tho, a friend of mine dyno'd his stock Z06 at 357hp at the wheels. i think it came to something like 12% loss.

scathcart

I will be.
Plenty of racer's do it. If it wasn;t important, why would engine brake dyno's exist?