soul assassin

specifically the new sbc-id, how did you guys set it up?? jesus this thing has some options but i am getting 2 different boost readings one from the sbc and the one on my greddy boost gauge don't match up its about.10 bar off do you think i have the gain cranked up to high or what? would that even affect it? any tips on how to set htis thing up before i go out and play with it tomorrow would be appreciated.

RecKleSs

What happened to all the instructions I mailed out to you a long time ago? All the information is there that you need to answer your questions.

EricM

Yes I do.

It's by far the coolest and best controller IMO. It;s weird that you got two diff. readings. You probably have to set the units right(just checking). Did you get the manifold line spliced, one to boost gauge and the other to SBC-ID ? Other than that, I have no idea what could be wrong.

soul assassin

thats what i wouldlike to know is if you used the auto setting or manual, the manual goes by offset how do you know what number represents how much boost? i wouldlike to see someof you settings, such as gain if you used auto or manual mode

EricM

Set the gain high, but not too high, try 15 first then go up. You'll notice lag is somewhat eliminated, build boost so rapid. And set boost pressure to about 50s(that should equate about 13-14 psi). I don't know bout higher pressure. Manual mode is much more fun than auto, but you do have to guess on what number to set(0-100). The manual say it'll handle 2.5 bar, I'd like to know also what boost is 100 on manual mode.
Good luck

soul assassin

sweet thanks for the info, i had the gaun set at about 35!lol