I'm looking for some hoses to complete the install of my Blitz SMIC. What I want to source is a "hump" hose for the outlet pipe, and a custom single 90 degree bend hose to connect the bottom IC inlet pipe to my efini outlet pipe - I imagine I would have to send dimensions for this one. Any suggestions on a good supplier?

Thanks in advance!

 

I find all my hose on ebay actually. Just search for 2.75" silicone his and youll find what you need.

 

boostcontroller.com - get some good hose. Cheap silicone couplers will just give you tons of problems down the road.

Dale

 

I've had good luck with siliconeintakes.com

 

while i agree there is super cheap couplers on ebay, if you cant discern which couplers are quality then you should use boostcontroller.com. that being said i've found the same couplers on ebay as bc.com for much less, its called shopping around. i've also found specific couplers that bc.com didnt have unfortunately.

 

These are not cheap, but are one of the best.
The hump gives flexibility to line things up, if need be.

Hump Hoses, Silicone Hoses Intercooler Turbo

 

This is the outfit I was looking at yesterday. I need to take some measurements for a single hose to connect the bottom of the IC to the Y-pipe, this place says they can do custom.

I'll check out the other sources that were mentioned too.

Thanks everyone for the help!

 

Vibrant Performance ::.
Silicone Hose
Mishimoto Performance Silicone Couplers

Lots of options.

 

Bumping this up because Boostcontroller.com has killer pricing on Samco intercooler couplers

Samco Straight Coupling 3" L, 2-3/4" (70mm) ID

 

Thanks for the bump. I need new hoses