2mm 2peice apex seals new!!
Thread Starter
Full Member
Joined: Mar 2001
Posts: 95
Likes: 0
From: Houston Texas
2mm 2peice apex seals new!!
Brand new still sealed in package,2mm apex seals for both rotors. 190 includes shipping. Mazdatrix sell them for 250.00 Email me if interested basspl4u@aol.com When buying rebuilding kit just tell them you have the apex seals. You will pay full price of 250+ in the package they just add every thing together and give you one price.
Trending Topics
Originally posted by j200pruf
2 piece seals not as good as 3 piece dude, I wish that I didn't put the 2 piece seals in my car, although I am sure they will work fine.
2 piece seals not as good as 3 piece dude, I wish that I didn't put the 2 piece seals in my car, although I am sure they will work fine.
no good and that mazda knows what they are doing.
well guess again mazda is in the process of changing
from the 3 piece to a new 2 piece seal by this time next
year it will be harder to get the old 3 piece from mazda
than the new 2 piece. cost of these new seals is looking
to be about the same as the old ones.
matt
Got Boost?
Joined: Feb 2002
Posts: 1,066
Likes: 1
From: Watertown, MA
everyone seems to think that the 2 piece seals are
no good and that mazda knows what they are doing.
well guess again mazda is in the process of changing
from the 3 piece to a new 2 piece seal by this time next
year it will be harder to get the old 3 piece from mazda
than the new 2 piece. cost of these new seals is looking
to be about the same as the old ones.
no good and that mazda knows what they are doing.
well guess again mazda is in the process of changing
from the 3 piece to a new 2 piece seal by this time next
year it will be harder to get the old 3 piece from mazda
than the new 2 piece. cost of these new seals is looking
to be about the same as the old ones.
the rx8 seal is a 2mm seal but totals only about the
height of the top part of the old 3 piece, just seems
stupid that mazda didn't make them taller which you
would think would last longer before flipping out of
the rotor and destroying the motor.
my 2 cents
matt
you can see the rx8 seal here:
http://www.v8less.com/programs/forum/index.php?
act=ST&f=18&t=6614&s=3b3223cd84be27e24aa2633ff7
2de24e
height of the top part of the old 3 piece, just seems
stupid that mazda didn't make them taller which you
would think would last longer before flipping out of
the rotor and destroying the motor.
my 2 cents
matt
you can see the rx8 seal here:
http://www.v8less.com/programs/forum/index.php?
act=ST&f=18&t=6614&s=3b3223cd84be27e24aa2633ff7
2de24e
Last edited by now; Jul 8, 2003 at 07:24 PM.
Open up! Search Warrant!
Joined: May 2002
Posts: 3,838
Likes: 3
From: Kicking down doors in a neighborhood near you
They flip out of the rotor if the apex seal groove is wider at the top than it is at the bottom. If you look at the groove from the side it will look like a V
Originally posted by Project84
They flip out of the rotor if the apex seal groove is wider at the top than it is at the bottom. If you look at the groove from the side it will look like a V
They flip out of the rotor if the apex seal groove is wider at the top than it is at the bottom. If you look at the groove from the side it will look like a V
out after the upper part of the 3 piece seal wore
down to the point there was not enough left to hold it in,
and the groove didnt look all that bad.
a 2 piece 2mm would stay in the groove much longer
than the 3 piece.
matt
Thread Starter
Full Member
Joined: Mar 2001
Posts: 95
Likes: 0
From: Houston Texas
Say guys that need your engine rebuilt, I would not be selling these apex seals at this price but I need the money to finish my car. 175 for the seals shipped. call mazadatrix, you are paying about half of what the seals cost. The package has never been opened
Thread
Thread Starter
Forum
Replies
Last Post
Snook
Single Turbo RX-7's
18
Oct 8, 2015 10:09 PM