topping out the 7
topping out the 7 vid enclosed
Last edited by ratincat; Mar 8, 2006 at 10:06 PM.
said 197 on the power fc commander display after i converted it from kmph umm yea we were just on an open road with no traffic and no copps 4 lane highway going to rotary revoultion last year
Trending Topics
heres a little bit better vid with the same clip in it
http://videos.streetfire.net/video/9...CA64798506.htm
http://videos.streetfire.net/video/9...CA64798506.htm
Well you did about 8k rpm's in 5th gear.
Can anyone convert that to MPH?
Not doubting your speed, you def did 180 and a bit more cause rpms were still moving when the needle was on 180 but idk, wont the car be a bit unstable at that speed?
I mean one slight movement and that coulda been your ***.
Can anyone convert that to MPH?
Not doubting your speed, you def did 180 and a bit more cause rpms were still moving when the needle was on 180 but idk, wont the car be a bit unstable at that speed?
I mean one slight movement and that coulda been your ***.
Why is it every guy that posts a vid has to include some baggy azz jean wearing homey music that not only blows, but is also so loud you can't hear the car? I guess I'm getting old - all that music sounds the same to me. Ahhh, the days of Rush & Van Halen...where have all the good tunes gone? 
I digress,....Dude, get your car properly tuned. 356 rwhp is what I had with stock twins @ 14 psi on a heat soaked motor? A properly set up T-78 is good for 450ish rwhp on pump gas.
Be careful on the top end, like someone said - one blown tire or mistake & you are likely DEAD.
-Matt

I digress,....Dude, get your car properly tuned. 356 rwhp is what I had with stock twins @ 14 psi on a heat soaked motor? A properly set up T-78 is good for 450ish rwhp on pump gas.
Be careful on the top end, like someone said - one blown tire or mistake & you are likely DEAD.
-Matt
Originally Posted by ratincat
i still have stock ports soo prolly whats holding me back






