My mk4 vs. gsxr 750
Junior Member
Joined: Jul 2005
Posts: 23
Likes: 0
From: Austin, TX
Originally Posted by Romancer
In texas? What were they stock to BPU mk IV's? To my knowledge texas has quite a few heavy hitters.
Oh yes, especially Austin. Austin has a few "heavy hitters" but more often than not, they're slower BPUs, small singles, or large turbos with stock fuel systems.
I manage
Thread Starter
Come get you some!!
Joined: Jul 2003
Posts: 911
Likes: 0
From: Bus length ahead of Radkins,Zinx,and Keynote
Originally Posted by jickel180
Oh yes, especially Austin. Austin has a few "heavy hitters" but more often than not, they're slower BPUs, small singles, or large turbos with stock fuel systems.
I manage
I manage
That is why I went with a 61mm. The guys with big turbos and fuel can't get traction till about 100mph with all the lag and ****. My car gets 20psi at about 4k rpm and pulls hard till about 7500rpm which is enough for about anything till a 170mph.
Rotary Freak
Joined: Oct 2001
Posts: 1,887
Likes: 1
From: Carmel, NY
Originally Posted by IndyKid
That is why I went with a 61mm. The guys with big turbos and fuel can't get traction till about 100mph with all the lag and ****. My car gets 20psi at about 4k rpm and pulls hard till about 7500rpm which is enough for about anything till a 170mph.
Full Member
Joined: Sep 2004
Posts: 172
Likes: 0
From: Speed City, IN
jickel180 nice 240 man my buddies about to pick one up.
indykids supra is really really nice. he has come on a few of the indianapolis rotary cruises and its really fast. hes a really cool guy. it shoots bluish flames!!
indykids supra is really really nice. he has come on a few of the indianapolis rotary cruises and its really fast. hes a really cool guy. it shoots bluish flames!!
Speed Racer
Joined: Oct 2002
Posts: 48
Likes: 0
From: Canton, MI
IndyKid was kind enough to give me driving instruction @ the REVO. I can attest to the strength of his car, it pulled hard even with the boost cranked all the way down 
What kind of torque #'s did you put down on the dyno?
What kind of torque #'s did you put down on the dyno?
Originally Posted by IndyKid
My car refuses to be dyno'ed. I tried at the rx7 store and put down 450rwhp but couldn't boost past 20lbs. The same thing happend at MSL a local place but I put down 470hp at 20lbs. I'm sure that it's about 500rwhp at my current tune @ 22/23lbs.
Thread Starter
Come get you some!!
Joined: Jul 2003
Posts: 911
Likes: 0
From: Bus length ahead of Radkins,Zinx,and Keynote
Originally Posted by ScreaminREW
IndyKid was kind enough to give me driving instruction @ the REVO. I can attest to the strength of his car, it pulled hard even with the boost cranked all the way down What kind of torque #'s did you put down on the dyno?
What kind of torque #'s did you put down on the dyno?Hey Kevin how ya doing buddy? The car made 486lbs. of torque@5100rpm. However that was at the 470whp power level. I'm sure that it's over 500tq. Even at the lowest setting which is 14psi the car put down 362rwhp and 375 tq.
Originally Posted by IndyKid
Hey Kevin how ya doing buddy? The car made 486lbs. of torque@5100rpm. However that was at the 470whp power level. I'm sure that it's over 500tq. Even at the lowest setting which is 14psi the car put down 362rwhp and 375 tq.
i hate you for making me jealous..
let me guess, high boost of 24psi is like 750rwhp right?
Thread
Thread Starter
Forum
Replies
Last Post