Another 03 Cobra Down
04-30-05, 09:42 AM
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Another 03 Cobra Down
Went to the local hangout and met a cool cobra owner...Anyway, we went to a deserted street and we both ran from a 20 roll. he hung with me through 1st and 2nd but got him by 2 cars in 4th. Both of us had pretty bad wheel spin in 1st and 2nd but hooked up by 3rd. No video but projectd on this forum can vouge for me 
He ran an 11.9 at the track and has full exhaust, intake, pully, chipped, tuned and running 13psi.
He ran an 11.9 at the track and has full exhaust, intake, pully, chipped, tuned and running 13psi.
05-01-05, 12:05 AM
#3
Wankel Shmankel
Join Date: Mar 2005
Location: Oahu (Hawaii)
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by apneablue
Went to the local hangout and met a cool cobra owner...Anyway, we went to a deserted street and we both ran from a 20 roll. he hung with me through 1st and 2nd but got him by 2 cars in 4th. Both of us had pretty bad wheel spin in 1st and 2nd but hooked up by 3rd. No video but projectd on this forum can vouge for me
He ran an 11.9 at the track and has full exhaust, intake, pully, chipped, tuned and running 13psi.
He ran an 11.9 at the track and has full exhaust, intake, pully, chipped, tuned and running 13psi.
Btw, what mods do you have
05-01-05, 01:34 AM
#4
I'm on a Boat!
iTrader: (15)
Join Date: May 2003
Location: OK
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
That was an Awsome race Apnea, but from my POV it looked a little more like 3 cars in the end. But you guys were really bookin so I may be wrong Either way Great kill. I see that Cobra out at C&T a lot. I may have to challenge him myself next time I see him. he was a pretty cool guy.
For those that may doubt Apnea or raise the flag, David is A straight up guy and has no reason to make up a kill. If you still doubt his integrity, Do a search on his posts... you will find more than enough reason( mods) to beleive what he says is true.
Oh and Dave, I'm probably gonna pick up the tires tomorrow so I can get then installed first thing on monday. Thanx again man, you're a life saver.
For those that may doubt Apnea or raise the flag, David is A straight up guy and has no reason to make up a kill. If you still doubt his integrity, Do a search on his posts... you will find more than enough reason( mods) to beleive what he says is true.
Oh and Dave, I'm probably gonna pick up the tires tomorrow so I can get then installed first thing on monday. Thanx again man, you're a life saver.
05-01-05, 09:36 AM
#5
05-01-05, 09:52 AM
#6
Eats, Sleeps, Dreams Rotary
Thread Starter
I was gonna say the mods are in my sig...But there's some BBQ add there now 
...I don't care if you guys claim BS on me...That will just make the kill feel that much better 
Hey Rich, we have someone coming all the way from Canada for our BBQ! You need to come down man? It's getting bigger.
As for my mods, you can find everything here and my last dyno was 412.
www.apneablue.com/rx7
Or the just the power stuff here.
Performance:[Top]- Gotham Racing Large Streetport w/3mm Mazda Apex Seals (Other Photos 1 - 2)
- Garett GT35/40 Turbo Kit. Down Pipe & Manifold Ceramic Coated
- 45mm Turbosmart Wastegate
- Tial Blow Off Valve
- Greddy Front Mount Intercooler
- Greddy Elbow
- Greddy Profec B Boost Controler
- Apexi PFC / Commander (Tuned by Steve Kan)
- Mid Pipe
- KnN RU-2510 Filter (going to size up to the RU2520 soon. this one too small)
- Racing Beat Catback Exhaust
- B&M Short Throw Shifter
- Greddy Race Plugs
- NGK Plug Wires
- HKS Twin Power Ignition Amp
- Double Throttle / Accelerated Warmup Removed
- Supra Fuel Pump (twin in-tank pump not yet installed)
- Water Injection
- Pri Fule Rail Milled w/850cc - Sec Top Feed Rail w/1600cc Injectors
- SX Fuel Pressure Regulator
- 3 Bar Map Sensor
- Eurathane Motor mounts
- Garfinkle Engine Torq Brace
- 9Lb ACT Flywheel
- Bonez Street/Strip Clutch
...I don't care if you guys claim BS on me...That will just make the kill feel that much better Hey Rich, we have someone coming all the way from Canada for our BBQ! You need to come down man? It's getting bigger.
As for my mods, you can find everything here and my last dyno was 412.
www.apneablue.com/rx7
Or the just the power stuff here.
Performance:[Top]- Gotham Racing Large Streetport w/3mm Mazda Apex Seals (Other Photos 1 - 2)
- Garett GT35/40 Turbo Kit. Down Pipe & Manifold Ceramic Coated
- 45mm Turbosmart Wastegate
- Tial Blow Off Valve
- Greddy Front Mount Intercooler
- Greddy Elbow
- Greddy Profec B Boost Controler
- Apexi PFC / Commander (Tuned by Steve Kan)
- Mid Pipe
- KnN RU-2510 Filter (going to size up to the RU2520 soon. this one too small)
- Racing Beat Catback Exhaust
- B&M Short Throw Shifter
- Greddy Race Plugs
- NGK Plug Wires
- HKS Twin Power Ignition Amp
- Double Throttle / Accelerated Warmup Removed
- Supra Fuel Pump (twin in-tank pump not yet installed)
- Water Injection
- Pri Fule Rail Milled w/850cc - Sec Top Feed Rail w/1600cc Injectors
- SX Fuel Pressure Regulator
- 3 Bar Map Sensor
- Eurathane Motor mounts
- Garfinkle Engine Torq Brace
- 9Lb ACT Flywheel
- Bonez Street/Strip Clutch
Last edited by apneablue; 05-01-05 at 09:55 AM.
05-01-05, 10:29 AM
#7
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by ProjectD
.........
Oh and Dave, I'm probably gonna pick up the tires tomorrow so I can get then installed first thing on monday. Thanx again man, you're a life saver.
Oh and Dave, I'm probably gonna pick up the tires tomorrow so I can get then installed first thing on monday. Thanx again man, you're a life saver.
Originally Posted by GoodfellaFD3S
Way to crush that slowbra meestor Lee, now go whup up on Ihor Huk !
!Trending Topics
05-01-05, 11:04 PM
#16
Missin' my FD
Join Date: Aug 2002
Location: Seminole, FL (Tampa Bay Area)
Posts: 1,755
Likes: 0
Received 0 Likes
on
0 Posts
Nice Kill! The 03/04 Cobras can vary greatly in speed based on tuning. Do you happen to know what his car his dynoed at? Be careful not to talk too much crap to him! They respond very well to nitrous. A friend of mine here in Tampa makes over 600 whp & 700 wtq with a 75 shot on the unported Eaton blower. He's a tuning nut though. His car rides out super hard.
BTW: I wasn't trying to say that you were talking crap, but rather just giving a friendly warning
BTW: I wasn't trying to say that you were talking crap, but rather just giving a friendly warning
05-01-05, 11:19 PM
#17
Wankel Shmankel
Join Date: Mar 2005
Location: Oahu (Hawaii)
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by apneablue
I was gonna say the mods are in my sig...But there's some BBQ add there now ...I don't care if you guys claim BS on me...That will just make the kill feel that much better
Hey Rich, we have someone coming all the way from Canada for our BBQ! You need to come down man? It's getting bigger.
As for my mods, you can find everything here and my last dyno was 412.
www.apneablue.com/rx7
Or the just the power stuff here.
Performance:[Top]- Gotham Racing Large Streetport w/3mm Mazda Apex Seals (Other Photos 1 - 2)
- Garett GT35/40 Turbo Kit. Down Pipe & Manifold Ceramic Coated
- 45mm Turbosmart Wastegate
- Tial Blow Off Valve
- Greddy Front Mount Intercooler
- Greddy Elbow
- Greddy Profec B Boost Controler
- Apexi PFC / Commander (Tuned by Steve Kan)
- Mid Pipe
- KnN RU-2510 Filter (going to size up to the RU2520 soon. this one too small)
- Racing Beat Catback Exhaust
- B&M Short Throw Shifter
- Greddy Race Plugs
- NGK Plug Wires
- HKS Twin Power Ignition Amp
- Double Throttle / Accelerated Warmup Removed
- Supra Fuel Pump (twin in-tank pump not yet installed)
- Water Injection
- Pri Fule Rail Milled w/850cc - Sec Top Feed Rail w/1600cc Injectors
- SX Fuel Pressure Regulator
- 3 Bar Map Sensor
- Eurathane Motor mounts
- Garfinkle Engine Torq Brace
- 9Lb ACT Flywheel
- Bonez Street/Strip Clutch
...I don't care if you guys claim BS on me...That will just make the kill feel that much better Hey Rich, we have someone coming all the way from Canada for our BBQ! You need to come down man? It's getting bigger.
As for my mods, you can find everything here and my last dyno was 412.
www.apneablue.com/rx7
Or the just the power stuff here.
Performance:[Top]- Gotham Racing Large Streetport w/3mm Mazda Apex Seals (Other Photos 1 - 2)
- Garett GT35/40 Turbo Kit. Down Pipe & Manifold Ceramic Coated
- 45mm Turbosmart Wastegate
- Tial Blow Off Valve
- Greddy Front Mount Intercooler
- Greddy Elbow
- Greddy Profec B Boost Controler
- Apexi PFC / Commander (Tuned by Steve Kan)
- Mid Pipe
- KnN RU-2510 Filter (going to size up to the RU2520 soon. this one too small)
- Racing Beat Catback Exhaust
- B&M Short Throw Shifter
- Greddy Race Plugs
- NGK Plug Wires
- HKS Twin Power Ignition Amp
- Double Throttle / Accelerated Warmup Removed
- Supra Fuel Pump (twin in-tank pump not yet installed)
- Water Injection
- Pri Fule Rail Milled w/850cc - Sec Top Feed Rail w/1600cc Injectors
- SX Fuel Pressure Regulator
- 3 Bar Map Sensor
- Eurathane Motor mounts
- Garfinkle Engine Torq Brace
- 9Lb ACT Flywheel
- Bonez Street/Strip Clutch
05-02-05, 12:01 AM
#18
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by pianoprodigy
Nice Kill! The 03/04 Cobras can vary greatly in speed based on tuning. Do you happen to know what his car his dynoed at? Be careful not to talk too much crap to him! They respond very well to nitrous. A friend of mine here in Tampa makes over 600 whp & 700 wtq with a 75 shot on the unported Eaton blower. He's a tuning nut though. His car rides out super hard.
BTW: I wasn't trying to say that you were talking crap, but rather just giving a friendly warning
BTW: I wasn't trying to say that you were talking crap, but rather just giving a friendly warning
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
15
09-08-15 05:30 PM