Testing with Water injection at Track day GCG high flow turbo FD3s
09-04-18, 11:28 AM
#1
RE for life
Thread Starter
Testing with Water injection at Track day GCG high flow turbo FD3s
I always use Water injection as proction meaing tuning my car at dyno without it and turn it on at track . my system is snow stage 2 with 20/80 ratio using smallest noozel
mid throttle reponse will be affect. but top speed is about the same. been track this setup for almost 2 year with pump gas no issue
first hot lap is .8kg
and 2/3 hot lap is 1.0 kg
GCG high flow turbo with street port and xcess lower intake manifold
mid throttle reponse will be affect. but top speed is about the same. been track this setup for almost 2 year with pump gas no issue
first hot lap is .8kg
and 2/3 hot lap is 1.0 kg
GCG high flow turbo with street port and xcess lower intake manifold
07-22-19, 11:11 PM
#2
Rotary Enthusiast
Very cool vid. I am currently installing an ai and always appreciate feedback from others on how it is working out.
Thread
Thread Starter
Forum
Replies
Last Post
Monsterbox
Auxiliary Injection
46
05-26-20 01:50 AM
diyman25
Time Slips and Dyno
3
08-17-18 04:32 PM
diyman25
Time Slips and Dyno
3
11-27-17 06:16 PM
LogicFoxX
Auxiliary Injection
9
11-04-10 04:56 AM
serge1
3rd Generation Specific (1993-2002)
3
05-09-02 02:46 AM
