Suspension Bearings
#3
SCCAEP
iTrader: (3)
Join Date: Dec 2006
Location: Dallas
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
I first mis-read your post like dgeesaman did, you don't want "bushings" you want "bearings", more specifically probably a "needle bearing" like these - http://www.awrracing.com/store/produ...products_id=35
This is not for your application (2nd Gen only) but might be worth a phone call as they may be able to do something with yours.
This is not for your application (2nd Gen only) but might be worth a phone call as they may be able to do something with yours.
#5
Senior Member
Join Date: Jul 2003
Location: San Jose
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
There are some parts from Japan for this but cost/delivery can be an issue. You might try http://www.autornd.com/catalog/index...8bda2e91842bbf.
I had monoballs put in my rear upper arms by TC Designs www.tcdesignfab.com.
-Andy
I had monoballs put in my rear upper arms by TC Designs www.tcdesignfab.com.
-Andy
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM