Suspension Bearings
Does anyone know where i can find suspension bearings to replace the upper and lower a-arm bushings for a 94 RX-7 (FD3S)?
|
They're all over this site.
You can get polyurethane and nylon bushings, standard Mazda bushings, or stiffer Mazda bushings (only from Mazdaspeed Motorsports). Run a search in the generation-specific forum and you'll get a load of hits. Dave |
I first mis-read your post like dgeesaman did, you don't want "bushings" you want "bearings", more specifically probably a "needle bearing" like these - http://www.awrracing.com/store/produ...products_id=35
This is not for your application (2nd Gen only) but might be worth a phone call as they may be able to do something with yours. |
I see, yes disregard my post.
|
There are some parts from Japan for this but cost/delivery can be an issue. You might try http://www.autornd.com/catalog/index...8bda2e91842bbf.
I had monoballs put in my rear upper arms by TC Designs www.tcdesignfab.com. -Andy |
All times are GMT -5. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands