http://www.mazdatrix.com/k86-92.htm

Comments on the Mazdatrix fenders compared to the AWR EP kit?

 

look like the same ones from ebay china action.....

dont like the wheel clearance above wheel myself. seems like the awr ones have wheel opening taller so wheels will tuck under better

http://cgi.ebay.com/ebaymotors/171-2...Q5fAccessories

 

Sure does. Shipping is high, but the parts cost is low. Somehow I suspect air management and aero is less than the AWR parts...

 

I run these fenders. They have the same clearance as a well rolled stock fender (20mm isn't much). I'm fitting a 235/40/17 up front under them. I think you might be able to get a 255 in there if you get a little closer to the strut (I've got at least 3/8 of an inch space left). I think the AWR fenders are quite a bit wider and deeper.

my $0.02
-Trent