Manifold Tech Discussion

Reply Subscribe

Thread Tools

Search this Thread

12-07-05, 04:13 PM

#26

rotarygod

Rotors still spinning

iTrader: (1)

Join Date: Jul 2002

Location: Houston

Posts: 4,181

Likes: 0

Received 20 Likes on 14 Posts

Quote:

Originally Posted by RETed

That SDSEFI design will cause uneven distribution of airflow between the runners.
The middle two will get the majority of airflow while the outside two will get less than the two center runners.

-Ted

If this were a 4 cylinder I would agree with that more than on a rotary. Since each rotor is fed by a center runner and an outer runner at the same time, the pressure and consequently the flow between the 2 runners will equalize between them and it'll be fine. The SDS setup would at least result in equal flow to the front and rear rotors themselves. This is better than placing the throttlebody at one end of the plenum where each rotor will not get the same amount of air.